GCC

From CLONWiki
Jump to navigation Jump to search

GCC installation:

  • set for gcc11.3 (based on command contrib/download_prerequisites):
gmp-6.1.0.tar.bz2: OK
mpfr-3.1.6.tar.bz2: OK
mpc-1.0.3.tar.gz: OK
isl-0.18.tar.bz2: OK
  • mkdir /apps/gcc if does not exist
  • cd /apps/gcc and run contrib/download_prerequisites; it may not get needed pachages because of firewall, but it will tell what is needed; copy it manually, for example:
cp /usr/downloads/gcc-8.3.0.tar.gz .
cp /usr/downloads/gmp-6.1.0.tar.bz2 .
cp /usr/downloads/mpfr-3.1.4.tar.bz2 .
cp /usr/downloads/mpc-1.0.3.tar.gz .
  • ./configure --prefix=/apps/gcc/8.3.0 --enable-languages=c,c++,fortran
NOTE: possible options can be checked on https://gcc.gnu.org/install/configure.html
  • make
  • make install


ARM installation

ssh to any vtp board as root, go to /apps/gcc, copy gcc-8.3.0.tar.xz from /usr/downloads. Untar it and type following:

cd gcc-8.3.0/
export ALL_PROXY=http://jprox:8082
contrib/download_prerequisites
./configure --prefix=/apps/gcc/8.3.0 --enable-languages=c,c++,fortran --with-float=hard
make 
make install

NOTE: if export ALL_PROXY above does not work, copy corresponding packages into gcc-8.3.0/ manually.


info from Kelvin:

#
# Quick note on how I built gcc 4.9.2
#
0) ensure the environment variable CCC does *not* exist prior to configure
1) make sure /apps/(gmp, mpc, mpfr, isl) exist
2) foreach (gmp, mpc, mpfr, isl) create lib/shared and mv *.so* into it
   -- This is so that gcc links (statically) with the required libraries and,
   thus, does not need to have LD_LIBRARY_PATH set for compiling.
3) setup a separate build environment for gcc (gcc-4.9.2-obj)
3) do the configure (note that this only builds teh 64bit gcc compiler):
   ../gcc-4.9.2/configure --prefix=/apps/gcc/4.9.2 --with-gmp=/apps/gmp --with-mpfr=/apps/mpfr --with-mpc=/apps/mpc --with-isl=/apps/isl/0.12.2 --disable-multilib --enable-languages=c,c++,fortran
4) make
5) make install
6) make clean
7) go back and mv [gmp, mpc, mpfr, isl]/lib/shared/*.so* to appropriate lib area
8) Create /site/cuesw/gcc/4.9.2/use.conf