Foundry Switches

BigIron RX-8

Main clon cluster switch located in counting room. Inventory number: F423964, p/n: BI-RX-8-AC, s/n: SA29085027.

general information

PROBLEM 1: make sure broadcast is working between 167,68,69,160 subnets, otherwise EPICS will not work; it must be set in BigIron switch

PROBLEM 2: switches in the hall must have spanning tree OFF; it must be set in every Foundry switch.

To access switches normally goto clon10/clon00 and do ssh boiarino@<switch_ip_name>, use 'boiarino's pass. Then type 'enable' and use pin and hardkey pin.

To access switches in the hall using tsconnect: the same passwords (?).

VLAN change

show vlan
configure terminal
vlan 596
  no tagged ethernet 13/1
  no untagged ethernet 13/2 to 13/8
vlan 569
  tagged ethernet 13/1
  untagged ethernet 13/2 to 13/8
exit
exit
write memory

Who is connected

List of all ports currently active:

show int | include is up

Get MAC address(es) of all devices connected to the particular port:

show mac-ad | include 3/17

Get IP address for particular MAC address:

show arp mac 0006.5b49.8ef6

Get full table of IP addresses, MAC addresses and port numbers:

show arp

The same for particular IP address:

show arp | include xxx.xxx.xxx.xxx