CLAS Online Software: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
[[DAQ/Online Software Stricture]] | [[DAQ/Online Software Stricture]] | ||
== PRIMEX setup == | |||
ssh to clon10 as primrun, pass 'primextocome' | |||
primex_start | |||
primex_exit | |||
primex_xterms_this | |||
primex_xterms_kill | |||
== Wolfram test setup == | == Wolfram test setup == | ||
Revision as of 14:32, 19 July 2010
If you want information about DAQ/Online Systems startup and recover procedures, use following link:
PRIMEX setup
ssh to clon10 as primrun, pass 'primextocome' primex_start primex_exit primex_xterms_this primex_xterms_kill
Wolfram test setup
- NOTE: EXPID must be clasdev, SESSION must be claswolf
- serial connection to the VME crate: on wolfram: cu -l /dev/cua/b
- to start DAQ:
ssh vpk@clon00 wolfram_start
- to start ROOT:
ssh vpk@clon00 cmroot claswolf hist_claswolf
- to kill DAQ:
wolfram_exit
Expert Information
ADC Pedestals Measurement Procedure
CMON CLAS Online Data Monitoring
Runlog programs