January 16, 2019 online meeting minutes

From CLONWiki
Jump to navigation Jump to search

present: Sergey Boyarinov, Eugene Pasyuk, vpk, Rafo, Raffaella, Irakli, Ben, Stepan, Cole

1. Run preparations: 

1. TS scalers readout change - Sergey/Nathan: DiagGuiServer reports lifetime and scalers as activemq messages, it is the only place; Nathan will include changes in epics

2. add 16-channel scope to FADC - Ben: was implemented by previous meeting, used in cosmic for few days, no problems so far

3. add normalized scaler with total charge to FADC250 - Ben: was implemented by previous meeting, same as previous, adcft1/2/3 to be completed

4. plug RF to right place - Sergey: done

5. Make sure new HTCC trigger is ready - Rafo, Sergey, Ben: Ben will do efficiency study on data and C++code

6. Trigger dictionary for inbending: new dictionary made by Raffaella with 1GeV threshold and PCALu/v/w; column for HTCC is there and empty; if HTCC dictionary is ready by next wednesday (Jan 23) Ben will implement it for coming run, otherwise we'll leave it for future

7. Level 3 with helicity correction - Sergey: in progress, coda_l3 is fully implemented, in particular it can be added to configuration using codaedit, started in runcontrol as any other component; helicity delay reporting correction in progress

8. New TDs to be installed - Sergey: 2 installed so far, will be done shortly

9. Test setup and spares in counting room - Sergey: ready 

10. Check spare pool again, clean up old boards - Sergey, Nathan (RF splitter for example): in progress

11. Install separate crate for v288's (classchv1): done

12. BAND need 8 DCS2's and Chris will give them remaining FADCs: all boards installed in both crates: 16 FADCs, 16 DCS2s, 2 v1190 TDCs, all firmwares up to date, coda configuration fixed, ready to go
  • new cable from sf to piw to get new connector - in progress
  • Chris will cleanup vme filters
  • trigger pattern in ET control word - Sergey will check; for cosmic runs and future data processing
  • implement better roc sync check - coda_mon ??


2. BONUS readout: waiting for words from Irakli on final solution, if both TPC and MM used we will need 1 new VXS crate - will come from Sacley; 1G should be enough


3. HPS DAQ/Trigger: all hardware installed, hodoscope+FDCs still in EEL, trigger firmware to go - Ben

Retrieved from "https://clonwiki0.jlab.org/wiki/index.php?title=January_16,_2019_online_meeting_minutes&oldid=7378"