Abaco XVB603

From CLONWiki
Revision as of 16:30, 2 June 2025 by Boiarino (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Initial setting:

Unplug ethernet cable.

In BIOS, go to Advanced->Network Stack Configuration and enable Network Stack and Ipv4 PXE Support.

In BIOS, go to Abaco->Network Boot Configuration and enable PXE ROM - ETH3 and PXE ROM - ETH4.

In BIOS, go to Abaco->VMEbus Configuration and set Reserve VME Space to 512 MBytes.

Save & Exit

Connect ethernet cable to the top port. Recycle power, it should boot (if not, in BIOS, go to Boot and set appropriate network port(s) in BOOT Option #1 (and #2)).

Retrieved from "https://clonwiki0.jlab.org/wiki/index.php?title=Abaco_XVB603&oldid=8316"