VME

VME controller BIOS important settings

Make sure VME memry size is set to 512M

It can be several network ports in BIOS, find right one by using 'blinking', remember MAC address.

old gefvme removal

yum remove kmod-gefvme gefvme-library

If failed on 'gefvme-library', do

rpm -e --noscripts gefvme-library

If file /etc/modules-load.d/gefvme.conf was not removed by above commands, remove it manually (if working from chroot ... then everything is done in root area, but gefvme.conf may survive in snapshot area, in that case remove it on controller and not in chroot).

File /etc/modules-load.d/vme.conf with contents

cmem_rcc
jvme
vme_vivo
vme_ca91cx42
vme_tsi148
vme

may not be needed (if modules already in kernel ?).

new jvme (not sure if module installation is needed, maybe in kernel already ?)

Project git link: https://code.jlab.org/fedaq/drivers/jvme/-/tree/release-3.0

On vme controller as boiarino, copy jvme-release-3.0.tar to $CODA/src and untar it.

Create two environment scripts:

jvme_bash:

#!/bin/bash
export LINUXVME=${CODA}/src/jvme-release-3.0/linuxvme
export LINUXVME_INC=${LINUXVME}/include
export LINUXVME_LIB=${LINUXVME}/Linux_`uname -m`_vme/lib
export LINUXVME_BIN=${LINUXVME}/Linux_`uname -m`_vme/bin
export LD_LIBRARY_PATH=${LINUXVME_LIB}:${LD_LIBRARY_PATH}
export KERNELRELEASE=3.10.0-1062.9.1.el7.x86_64

jvme_tcsh:

#!/bin/tcsh
setenv LINUXVME ${CODA}/src/jvme-release-3.0/linuxvme
setenv LINUXVME_INC ${LINUXVME}/include
setenv LINUXVME_LIB ${LINUXVME}/Linux_`uname -m`_vme/lib
setenv LINUXVME_BIN ${LINUXVME}/Linux_`uname -m`_vme/bin
setenv LD_LIBRARY_PATH ${LINUXVME_LIB}:${LD_LIBRARY_PATH}
setenv KERNELRELEASE 3.10.0-1062.9.1.el7.x86_64

Run source jvme_tcsh. Go inside jvme-release-3.0. In two files CMakeLists.txt and src/CMakeLists.txt, change

set(libpath Linux-${CMAKE_SYSTEM_PROCESSOR}/lib)
set(libpath Linux-${CMAKE_SYSTEM_PROCESSOR}/bin)

to

set(libpath Linux_${CMAKE_SYSTEM_PROCESSOR}_vme/lib)
set(libpath Linux_${CMAKE_SYSTEM_PROCESSOR}_vme/bin)

Type cmake -B build -S . -DCMAKE_INSTALL_PREFIX=$LINUXVME

Fix Makefile in kernel_driver and three it's subdirectories, it must have following in the beginning:

KVERSION := $(KERNELRELEASE)
ifeq ($(origin KERNELRELEASE), undefined)
KVERSION := $(shell uname -r)
endif

In directory jvme-release-3.0, type make and make install,

Do cd kernel_driver and make (do NOT do make install).

On the server, do

mount -o bind /usr/clas12 /diskless/CentOS7/x86_64/root/usr/clas12
mount -o bind /usr/local /diskless/CentOS7/x86_64/root/usr/local
mount -o bind /home /diskless/CentOS7/x86_64/root/home
chroot /diskless/CentOS7/x86_64/root
cd /usr/clas12/release/2.0.0/coda/src
source jvme_bash
cd jvme-release-3.0/kernel_driver
make install

Still on server, add two files to /etc/udev/rules.d directory:

99-cmem.rules:

KERNEL=="cmem_rcc", MODE="0666"

99-vme.rules:

KERNEL=="bus/vme/ctl", MODE="0666"
KERNEL=="bus/vme/m_a16", MODE="0666"
KERNEL=="bus/vme/m_a24", MODE="0666"
KERNEL=="bus/vme/m_a32", MODE="0666"
KERNEL=="bus/vme/m_crcsr", MODE="0666"
KERNEL=="bus/vme/s_a32", MODE="0666"
KERNEL=="bus/vme/s_rsvd1", MODE="0666"
KERNEL=="bus/vme/s_rsvd2", MODE="0666"
KERNEL=="bus/vme/s_rsvd3", MODE="0666"

Reboot controller, check if everything is good.

NOTE: if changing something in kernel module(s), it is not needed to reboot every time after make/make install is done in jvme-release-3.0/kernel_driver directory. Just run ./load_driver.sh as root on controller, and all modules will be reloaded.

NOTE: to add /et to snapshot area: on server, create /et directories in both root and snapshot areas, then add line '/et' to /etc/statetab file in root area, then reboot controller.