CLON Standard Procedures

Contacts:

• Computer Center 24/7 phone: 876-1794
• Sergey Boyarinov: USA cell: 757-232-6221 by Verizon

ALERT in the hall

ssh clasrun@clondaq7 (or vncviewer -Shared clondaq7:5901)
killcoda
runcontrol -rocs
Configure: ALERT_CTOF_CND_TS
Download: alert_cosmics.trg

Data will be written to directories clondaq7:/data/stage_in/alert_xxxxxx

Config file for AHDC (Dream-based electronics) is $CLON_PARMS/mvt/alert1.cnf. It is symbolic link, set by pedestal measurement procedure, reference to Rafayel Paremuzyan <rafopar@jlab.org>.

Configuring ATOF: reference to Benjamin Raydo <braydo@jlab.org>.

Wolfram test setup in TEDF/1546

Just daq testing with random pulser:

ssh clasrun@pcal0
runcontrol -rocs
Configure: pcal0
Download: sergey/random.trg

Production:

ssh clasrun@clonpc27
runcontrol -rocs
Configure: WOLFRAM_POWDER
Download: PCAL0/wolfram.trg

Sampa test setup in EEL/125

ssh clasrun@clonpc11
runcontrol -rocs
Configure: clonpc11_svt3
Download: sergey/svt3.trg

VMM test setup in 12/B108

ssh clasrun@clondaq8
runcontrol -rocs
Configure: clondaq8
Download: sergey/dummy.trg

See VMM3 for details.

SRS test setup in EEL/125

vncviewer clonsl2:5 (pass 'hpshodo')
ssh clasrun@clon10new
runcontrol -rocs
Configure: urwell_test3_clondaq10new_er
Download: uRwellTestProto/test3_urwell_Random.trg

Streaming test setup in Hall B Counting Room

ssh clonfarm21
runcontrol -rocs

Configure(test setup): TEST0 (test0 only), TEST0_TEST2 (test0 master + test2 slave)
Download: STREAMING/test0_test2.trg, STREAMING/test0_dcrb.trg

Configure(hallb): DC2(dc21,dc22,dc23 standalone)
Download: STREAMING/subway.trg

BDX test setup in Hall B Counting Room

'Triggered' daq:

ssh clondaq5 as 'clasrun'
runcontrol -rocs
Configure: BDX0 (without writing to the disk), BDX0_ER (with writing)
Download: BDX/bdx0_random.trg (internal random pulser)
          BDX/bdx0_generator.trg (external pulser)
          BDX/bdx0_scintillator.trg (two scintillators coincidence)

'Streaming; daq: not ready yet

PRAD test setup in ESB

ssh clasrun@clondaq13
runcontrol -rocs
Configure: prad0, prad0_er
Download: PRAD/prad0.trg
(data will be recorded to local disk to directory /data)

PETIROC test setup

ssh clasrun@clondaq11
runcontrol -rocs
Configure: clondaq11