ROOT

RHEL9

yum install libuuid-devel xrootd xrootd-devel xrootd-client-devel python3 python3-devel z3 z3-devel

yum gcc-fortran imake (for cernlib)

yum install boost boost-devel (for evio)

If Git does not work, download source to /usr/downloads manually and do following:

cd /apps/root
cp /usr/downloads/root_v6.24.08.source.tar.gz .
gunzip root_v6.24.08.source.tar.gz
tar xvf root_v6.24.08.source.tar
rm root_v6.24.08.source.tar.gz
mv root_v6.24.08 root_v6.24.08_source
mkdir 6.24.08
cd 6.24.08
cmake ../root-6.24.08_source -Dbuiltin_xrootd=OFF -Dclad=OFF
cmake --build . -- -j32

RHEL7

Installation from source (replace root_install with for example 6.24.06):

# The latest stable branch gets updated automatically on each release. 
# You may update your local copy by issuing a `git pull` command from within `root_src/`.
git clone --branch latest-stable https://github.com/root-project/root.git root_src
mkdir root_build root_install && cd root_build
cmake -DCMAKE_INSTALL_PREFIX=../root_install ../root_src # && check cmake configuration output for warnings or errors
cmake --build . -- install -j4 # if you have 4 cores available for compilation
source ../root_install/bin/thisroot.sh # or thisroot.{fish,csh}

Installation (version 6.16.0 and GCC 8.3.0 in this example):

• cd /apps/root

• git clone http://github.com/root-project/root.git 6.16.0

• cd 6.16.0

• git checkout -b v6-16-00 v6-16-00

• cd build

• setenv CC /apps/gcc/8.3.0/bin/gcc

• setenv CXX /apps/gcc/8.3.0/bin/g++

• cmake /apps/root/6.16.0

• cmake --build . -- -j32

Everything is ready. Setup environment:

• source /apps/root/6.16.0/build/bin/thisroot.csh

Now it can be run:

• root