February 26, 2020 online meeting minutes

present: Sergey Boyarinov, Stepan, Nathan, Valery, Ben

1. RG-F run status

• DAQ event rate is only few kHz, data rate significantly below 100MB/s because of gas target, with beam current 250nA

• trigger is electron with drift chamber roads and 300MeV EC threshold, seems sufficient for production running

• big dead time produced by RTPC readout, cannot run faster then about 1.5kHz if desired lifetime is above 90%

• beam current unlikely to be increased, so we will stay with current settings for entire run

• event rate/data rate were added to DAQ/Trigger EPICS GUIs

• MPOD power supply has some issues - Nathan

• logbook GUI insertion policy may be reconsidered - too many GUIs in logbook

• some network switches keeps dying, replacement installed already on FC, moving wires there; port 48 is set to 10MBit/fullduplex for etherlite32

• trigger bit names should be in trigger GUI, Ben/Valery will implement it

2. Streaming DAQ progress

• still need to fix VTP TCP/IP issues (Ben)

• reconstruction algorithms to be considered for online data processing: offline code, level1 code, ...; can be tested as 'level3' in current DAQ