Akcp
AKCP is ethernet-based devices to monotor temperature, humidity etc. Web site is http://www.akcp.com.
Documentation: Manual(pdf) MIBs(pdf)
Initial settings:
Device comes with default IP address 192.168.0.100. To change it, do following (example for the MAC OS X):
- connect it to laptop ethernet port
- in system preferences->network set Configure IPv4: Manually, IP Address: 192.168.0.1
- open web browser and goto http://192.168.0.100/
- login as Administrator, pass public
- click Network and set desired values for IP
- click Save
- choose US Eastern Time, set current time manually, choose Once an hour, set NTP servers ntp1.jlab.org and ntp2.jlab.org
- click Save
From now on all settings can be done over the web from any computer (inside firewall of course)
Go to Summary, click on Temperture and choose Celsius for Units. Click Save.
Go to System, set System Name, System Location, System Contact and change data collection period to 5 minutes. Click Save.
MRTG:
To add new sensors to MRTG go to the server where MRTG is running, and fix etc/temp.inc and share/index.html files inside MRTG installation directory.