ERROR Book

From CLONWiki
Revision as of 14:31, 17 March 2010 by 129.57.167.4 (talk)
Jump to navigation Jump to search
  • Sergey B. 14-mar-2010: old problem, can be posted already: if EB was not restarted afre the ROC crash, it sometimes waiting for several ROcs in the end of prestart, however runcontrol allows 'Go' button become active; something wrong with the logic, must check; will be good of course to avoid that situation by making EB reset itself properly on 'reset' transition after the ROC crash
  • Sergey B. 14-mar-2010: during reboot dc9 gives following:
.................
ppc/bootscripts/boot_dc9
taskSpawn("TCPSERVER") returns 475458320
bind on port 5001
myname >dc9<
-> Query >UPDATE Ports SET Host='dc9',tcpClient_tcp=5001 WHERE Name='dc9'< succeeded
INFO(mysql_real_connect9): errno=0
INFO(mysql_real_connect9): OK
mysql_real_connect9: error message: 2013/HY000 (Lost connection to MySQL server during query)
dbConnect ERROR: mysql == NULL
333333333333333
program
Exception current instruction address: 0x1c5
e8734
Machine Status Register: 0x00081000
Condition Register: 0x40000085
Task: 0x1c5e8e50 "ROC"
interrupt: Unconnected main interrupt 0
logTask: 3222 log messages lost.
interrupt: Unconnected main interrupt 1
interrupt: Unconnected main interrupt 0
interrupt: Unconnected main interrupt 1
interrupt: Unconnected main interrupt 0
interrupt: Unconnected main interrupt 1
interrupt: Unconnected main interrupt 0
interrupt: Unconnected main interrupt 1
interrupt: Unconnected main interrupt 0
..............

probably mysql connection problem

RESOLVING: will make 5 attempts to to connect waiting 3 seconds in between, then will give up.

  • Sergey B. 14-mar-2010: if in prestart stage hit abort and reset, all ROCs printing
wait: coda request >exit< in progress

indefinitely, must check

  • Sergey B. 14-mar-2010: coda_eb x-term hung completely, kill coda_eb but yellow window still stuck; last messages were:
codaEnd 10
codaEnd 11
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
codaExecute done
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.28< port=59319
wait: coda request >< in progress
wait: coda request >< in progress
wait: coda request >< in progress
wait: coda request >< in progress
wait: coda request >< in progress
wait: coda request >< in progress
Executing >< (len=0)
codaExecute: ERROR: len=0 - do nothing
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.28< port=59342
wait: coda request >< in progress
Executing >TP/1.0

Probably last string contains something, will remove printing

  • Sergey B. 13-mar-2010: sometimes after bad crash all rocs (even scalers) must be rebooted, otherwise EB is crashing with messages:
.....
case 0: no swap
case 0: no swap
case 0: no swap
case 0: no swap
case 0: no swap
case 0: no swap
case 0: no swap
case 0: no swap
case 0: no swap
case 0: no swap
 .. done.
[0] FATAL: Event (Num 1 type 1) NUMBER mismatch -- roc[11] (rocid 30) 
sent -1 (type 18)
[0] ERROR: Discard data until next control event
clondaq1:coda_eb>

After that problem stays, restarted every daq component (EB, ER, ETs, runcontrol, rcServer) - does not helped. Did daq_exit, daq_start, reboot all rocs again - not it works.

In the same time ROCs were printing messages 'no data', may be it was the source of EB troubles ...

  • Sergey B.12-mar-2010 around 10:50am: something is breaking coda_eb/coda_er:
.....
UDP_standard_request >sta:EB1 booted<
UDP_standard_request >sta:EB1 booted<
UDP_standard_request >sta:EB1 booted<
UDP_standard_request >sta:EB1 booted<
UDP_cancel: cancel >sta:EB1 booted<
codaUpdateStatus: updating request done
CODA_Init 14
2
clasprod::EB1> bind on port 5001
DB update: >UPDATE process SET inuse='5001' WHERE name='EB1'<
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.28< port=37258
wait: coda request >< in progress
wait: coda request >< in progress
wait: coda request >< in progress
wait: coda request >< in progress
wait: coda request >< in progress
wait: coda request >< in progress
Executing >< (len=0)
Segmentation fault (core dumped)
clondaq1:coda_eb>

In the same time et_start complains (we have now ET system protected against CC scans): 

et ERROR: et_netserver: ET server being probed by non-ET client or read failure
et ERROR: et_netserver: ET server being probed by non-ET client or read failure

FIXED by checking for the len=0 in the message string, all other possible checks were implemented already

  • Sergey B. 12-mar-2010: global reboot gives almost all PMCs (except first two) failing on MySQL access:
Done executing startup script $CODA/VXWORKS_
ppc/bootscripts/boot_pmc1
-> INFO(mysql_real_connect9): errno=0
INFO(mysql_real_connect9): OK
mysql_real_connect9: error message: 2013/HY000 (Lost connection to MySQL server during query)
dbConnect ERROR: mysql == NULL
program
Exception current instruction address: 0x00000000
Machine Status Register: 0x0008b030
Condition Register: 0x40000085
Task: 0x1e404190 "coda_pmc"

It should be mentioned that we are doing something right now; day before it was no activity and all rebooted fine.

  • Sergey B. 1-sep-2009: during croctest1 reboot:
INFO(mysql_real_connect9): errno=0
INFO(mysql_real_connect9): OK
mysql_real_connect9: error message: 2013/HY000 (Lost connection to MySQL server during query)
dbConnect ERROR: mysql == NULL

second reboot went fine

  • Sergey B. 15-june-2009: just after run was ended noticed that all runs starting from 60073 has 'No configuration!' instead of 'PROD' etc. Correcting manually. Must check if other information is correct, and understand the reason if possible .. Is it related to the database update procedure inplemented around that time ?

It appeares that begin_clasprod_xxxxxx.txt log files has that wrong starting from run 60073.

  • Sergey B. 11-June-2009: swaped ec4 and sc2 and during sc2 boot see following from host:
..........................
taskDelay(sysClkRateGet()*5)
 Args = -session clasprod -objects sc2 ROC -i
CODA_Init reached
CODA_Init 1
CODA_Init 2
sc2
CODA_Init 11
CODA_Init: objectTy >(null)<
CODA_Init 12
CODA_Init: use 'SESSION' as >clasprod<
Tcl_AppInit CALLS !!!!!
11-11
11-12
11-13
11111111111111111
22222222222222222
0xdd0e880 (tNetTask): arptnew failed on 8139a743
value = 0 = 0x0
taskSpawn "TCP_SERVER",250,0,100000,tcpServer
value = 231091088 = 0xdc62b90
proconhost
value = 0 = 0x0
......................

Second reboot shows the same: 

...................
22222222222222222
0xdd0e880 (tNetTask): arptnew failed on 8139a743
>>>>>>>clon10 clasrun 2508 9998<<<<<<<<< 24
list >clon10 clasrun 2508 9998<
machine name = clon10
user ID      = 2508
group ID     = 9998
.................


  • Sergey B. around 6-June-2009: ec2pmc1 error message:
write_thread: about to print
write_thread: about to print
write_thread: about to print
write_thread: about to print: 255115 20
write_thread: about to print: 255115 20
write_thread: about to print: 255115 20
write_thread: wait=    199 send=      8 microsec per event (nev=12755)
CALLING customized :
machine check 
SRAM ERROR :
SRAM Error Address    : 0x00000000.f2000504
SRAM Error Data Low   : 0x006805e0
SRAM Error Data High  : 0x00420000
SRAM Error Parity     : 0x00000004
SRAM Error Cause      : 0x00000001
PCI_0 DEVICE ERROR :
PCI_0 Error: Status=0x00000100
Master abort
PCI Cmd=7 (MemWr)  ByteEnable=0  Par=0
Error Address High: 0x00000000
Error Address Low : 0xf0d10128
CALLING generic    :
machine check
Exception next instruction address: 0x0001f058
Machine Status Register: 0x0012b030
Condition Register: 0x40222042
Task: 0x1e3b0020 "coda_net"

reboot did not helped, have to turn pmc off and run on host only


  • Sergey B. 4-June-2009: when rebooting all rocs, some cannot connect to DB, as result have following:
0x1e42a360 (coda_pmc): bb_new: 'big' buffer 
created (addr=0x1eba3590, 16 bufs, 3145728 size)
coda_pmc: big buffer1 allocated
myname >ec1pmc1<
Done executing startup script $CODA/VXWORKS_
ppc/bootscripts/boot_pmc1
-> INFO(mysql_real_connect9): errno=0
INFO(mysql_real_connect9): OK
program
Exception current instruction address: 0x00000000
Machine Status Register: 0x0008b030
Condition Register: 0x40000085
Task: 0x1e42a360 "coda_pmc"
-> tt
14cad8 vxTaskEntry    +68 : coda_pmc ()
1e2275c0 coda_pmc       +144: mysql_query ()
1e258520 mysql_query    +54 : mysql_real_query ()
1e249850 mysql_real_query+110: mysql_send_query ()
1e249718 mysql_send_query+1d0: 0 ()
value = 0 = 0x0
->

for some reason it efefcts mostly PMCs. First 10 or so PMCs booted fine, and then few shows that error, and few following booted fine again, and so on. It looks like DB does not respond right the way, and PMC exits on timeout and do not try again. Should fix that place.


  • Sergey B. 15-may-2009: last night following error messages from sc2 were reportedly associated with 2 crashes (I was not on shift):
write_thread: about to print: 394603 20
write_thread: about to print: 394603 20
write_thread: wait=    176 send=      6 microsec per event (nev=19730)
0x1b1c7e00 (coda_proc): timer: 9 microsec (min=3 max=909 rms**2=11)
proc_thread: wait=    176 send=     12 microsec per event (nev=14534)
0x1b1c7e00 (coda_proc): timer: 9 microsec (min=3 max=909 rms**2=19)
0x1b1c7e00 (coda_proc): timer: 9 microsec (min=3 max=909 rms**2=17)
bosMgetid: ERROR: lenn=0
???: 0x52432d32 0x38363333 0x31313534 0x00696d3d 0x25640a00
bosMgetid: ERROR: name >RC-2< does not described, update clonbanks.ddl file !!!
bosMgetid: lenn=4, len=4, nddl1=116
bosMgetid: name=>RC-286331154<
try again ..
bosMgetid: ERROR: lenn=0
!!!: 0x52432d32 0x38363333 0x31313534 0x00696d3d 0x25640a00
bosMgetid: lenn=4, len=4
bosMgetid: ERROR: name >RC-2< does not descr
ibed, update clonbanks.ddl file !!!
bosMgetid: lenn=4, len=4, nddl1=116
bosMgetid: name=>RC-286331154<
no way !!
bosMlink: ERROR: bosMgetid returns -99

interrupt: timer: 48 microsec (min=9 max=195 rms**2=9)
interrupt: timer: 45 microsec (min=9 max=195 rms**2=18)
interrupt: timer: 45 microsec (min=9 max=195 rms**2=10)
interrupt: timer: 48 microsec (min=9 max=195 rms**2=14)
setHeartError: 0 >sys 0, mask 14<
WARN: HeartBeat[0]: heartbeat=6658(6658) heartmask=14
UDP_cancel: cancel >inf:sc2 sys 0, mask 14<
UDP_cancel: cancel >inf:sc2 sys 0, mask 14<



  • Sergey B. 14-May-2009 5:54am: got page from clascron@clon10: 'Process monitor: missing process: alarm_server - Online problem: alarm_server did not respond to status pool request'. Found later that stadis was not updating etc. It appeares that smartsockets server was hund somehow on clondb1, for example command 'ipc_info -a clasprod' from clon10 or clon00 did not worked, messages were:
clon00:clasrun> ipc_info -a clasprod
08:08:31: TAL-SS-00088-I Connecting to project <clasprod> on <local> RTserver
08:08:31: TAL-SS-00089-I Using local protocol
08:08:31: TAL-SS-00090-I Could not connect to <local> RTserver
08:08:31: TAL-SS-00093-I Skipping starting <start_never:local> RTserver
08:08:31: TAL-SS-00088-I Connecting to project <clasprod> on <clondb1> RTserver
08:08:31: TAL-SS-00089-I Using local protocol
08:08:31: TAL-SS-00090-I Could not connect to <clondb1> RTserver
08:08:31: TAL-SS-00088-I Connecting to project <clasprod> on <clondb1> RTserver
08:08:31: TAL-SS-00089-I Using tcp protocol
^C

and it waits here. After restarting server on clondb1 by commands 

/etc/init.d/smartsockets stop
/etc/init.d/smartsockets start

everything came back to normal. We should think about detecting that problem and restarting server automatically, also it happens very rearly, few time a year. Probably it can be done by monitoring cpu usage: when server was hung it was using 100% of cpu: 

top - 08:06:16 up 130 days,  8:59,  1 user,  load average: 2.13, 2.03, 1.64
Tasks:  92 total,   2 running,  90 sleeping,   0 stopped,   0 zombie
Cpu(s): 25.0% us,  0.1% sy,  0.0% ni, 73.0% id,  1.9% wa,  0.0% hi,  0.1% si
Mem:   3995356k total,  3968880k used,    26476k free,    88168k buffers
Swap:  8385920k total,      208k used,  8385712k free,  3432056k cached
  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND                                                                                                       
 4471 root      25   0  5908 4540 1956 R  100  0.1 300:24.06 rtserver.x                                                                                                     
    1 root      16   0  4756  556  460 S    0  0.0   0:11.25 init                                                                                                           
    2 root      RT   0     0    0    0 S    0  0.0   0:03.85 migration/0                                                                                                    
    3 root      34  19     0    0    0 S    0  0.0   0:10.23 ksoftirqd/0                                                                                                    
    4 root      RT   0     0    0    0 S    0  0.0   0:01.79 migration/1                                                                                                    
    5 root      34  19     0    0    0 S    0  0.0   1:03.72 ksoftirqd/1                                                                                                    
    6 root      RT   0     0    0    0 S    0  0.0   0:01.62 migration/2

while normally it uses fractions of percent. It is also will be useful to monitor cpu usage in general, few days ago clasrun's sshd on clon10 was taking almost 50% of cpu.


  • Sergey B. 12-may-2009: looking for the reason of missing gate messages in all DC crates we found that front end busy cable from SF to FC was disconnected on the floor. For the future we should remember that disconnecting that cable may create missing gate messages. It is also important before every run to use 'dc_all' configuration and look at scope in the counting house to make sure front end busy signal is there.


  • Sergey B. 16-feb-2009: runcontrol pop-up message while pressing 'Configure':
rcConfigure::loadRcDbaseCbk: Loading database failed !!!

On second 'Configure' click it worked.

  • Sergey B. June-2008: it looks like when one SILO drive goes bad, something is happening in script's logic and it never tries to run 2 streams, only one ! One .temp link can be observed, aling with one presilo1 link which is NOT becoming another .temp. Need check !!!
  • Sergey B. 7-may-2008: EB1 crashed, last messages:
EB: WARNING - resyncronization in crate controller number  5 ...  fixed
.
EB: WARNING - resyncronization in crate controller number  6 ...  fixed
.
EB: WARNING - resyncronization in crate controller number  6 ...  fixed
.
ERROR: lfmt=0 bankid=0

Found that tage2 and tage3 must be rebooted


  • Sergey B. 5-may-2008: polar crate turned off; turn it back on, but notice that

one of str7201 scalers has all lights on; scaler was replaced in 2 days, everything works fine


  • Sergey B. 30-apr-2008: gam_server on clon04 takes 100% CPU

Found on the web that creating file '/etc/gamin/gaminrc' with following contents will help: 

#configuration for gamin
# Can be used to override the default behaviour.
# notify filepath(s) : indicate to use kernel notification
# poll filepath(s)   : indicate to use polling instead
# fsset fsname method poll_limit : indicate what method of notification for the filesystem
#                                  kernel - use the kernel for notification
#                                  poll - use polling for notification
#                                  none - don't use any notification
#
#                                  the poll_limit is the number of seconds
#                                  that must pass before a resource is polled again.
#                                  It is optional, and if it is not present the previous
#                                  value will be used or the default.
fsset nfs poll 10
# use polling on nfs mounts and poll once every 10 seconds
# This will limit polling to every 10 seconds and seams to prevent it from running away

Created file, will see if it helped ..


  • Sergey B. 20-apr-2008: sc2pmc1 error message (during "end run' ???)
.................................................
write_thread: wait=    135 send=     28 microsec per event (nev=12351)
0x19c18050 (coda_proc): timer: 23 microsec (min=8 max=2161 rms**2=4)
proc_thread: wait=    130 send=     31 microsec per event (nev=14709)
0x19c18050 (coda_proc): timer: 23 microsec (min=8 max=2161 rms**2=10)
0x19c18050 (coda_proc): timer: 23 microsec (min=8 max=2161 rms**2=15)
write_thread: about to print
write_thread: about to print
write_thread: about to print
write_thread: about to print
write_thread: about to print
write_thread: about to print: 252148 20
write_thread: about to print: 252148 20
write_thread: about to print: 252148 20
write_thread: wait=    135 send=     31 microsec per event (nev=12607)
0x19c18050 (coda_proc): timer: 23 microsec (min=8 max=2161 rms**2=19)
proc_thread: wait=    135 send=     31 microsec per event (nev=14739)
0x19c18050 (coda_proc): timer: 23 microsec (min=8 max=2161 rms**2=19)
0x19c18050 (coda_proc): timer: 23 microsec (min=8 max=2161 rms**2=14)
 ERROR: bufout overflow - skip the rest ...
        bufout=485322144 hit=485387636 endofbufout=485387680
write_thread: about to print
write_thread: about to print
write_thread: about to print
write_thread: about to print
write_thread: about to print
write_thread: about to print: 255564 20
write_thread: about to print: 255564 20
write_thread: about to print: 255564 20
write_thread: wait=    128 send=     42 microsec per event (nev=12778)
proc_thread: wait=    371 send=     31 microsec per event (nev=6291)
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000140 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x0150107F -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x015810DC -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x02B80FD6 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x02A010BE -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000060 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000040 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000060 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000040 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000040 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000060 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000040 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000040 -> resyncronize !!!
..................................................


At the same time at sc2: 

......................................
interrupt: timer: 33 microsec (min=6 max=401 rms**2=14)
interrupt: timer: 33 microsec (min=6 max=401 rms**2=4)
interrupt: timer: 33 microsec (min=6 max=401 rms**2=17)
interrupt: timer: 33 microsec (min=6 max=401 rms**2=1)
interrupt: timer: 33 microsec (min=6 max=401 rms**2=17)
interrupt: timer: 33 microsec (min=6 max=401 rms**2=0)
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
................................
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
logTask: 220 log messages lost.
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
logTask: 692 log messages lost.
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
logTask: 544 log messages lost.
..................................
interrupt: WARN: [ 0] slotnums=1, tdcslot=16 -> use slotnums
logTask: 562 log messages lost.
interrupt: SYNC: ERROR: [ 0] slot=16 error_flag=1 - clear
logTask: 707 log messages lost.
interrupt: SYNC: ERROR: [ 3] slot=19 error_flag=1 - clear
logTask: 517 log messages lost.
interrupt: SYNC: ERROR: [ 4] slot=20 error_flag=1 - clear
logTask: 620 log messages lost.
interrupt: SYNC: ERROR: [ 5] slot=21 error_flag=1 - clear
logTask: 559 log messages lost.
interrupt: SYNC: scan_flag=0x00390000
logTask: 512 log messages lost.
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
logTask: 671 log messages lost.
......................................
logTask: 563 log messages lost.
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
logTask: 385 log messages lost.
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
wait: coda request in progress
codaExecute reached, message >end<, len=3
codaExecute: 'end' transition
wait: coda request in progress
wait: coda request in progress
wait: coda request in progress
wait: coda request in progress
wait: coda request in progress
.......................................
wait: coda request in progress
wait: coda request in progress
interrupt: WARN: [ 0] slotnums=0, tdcslot=16 -> use slotnums
interrupt: TRIGGER ERROR: no pool buffer available
wait: coda request in progress
wait: coda request in progress
.....................................

Note: sc2 never warn about wrong slot number before that moment.

FIX: it seems there is a bug in 1190/1290-related rols and library: NBOARDS set to 21 and several arrays allocated with that length, but actual board maximum number is 21; NBOARDS was set to 22 everywhere, will test next time


  • Sergey B. 31-mar-2008: CC scans CODA !!! messages from EB:
wait: coda request in progress
wait: coda request in progress
wait: coda request in progress
wait: coda request in progress
wait: coda request in progress
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=59063
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=60187
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=60295
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=60418
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=60823
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=32961
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=33122
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=33795
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=34251
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=34529
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=35811
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=36134
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=41569
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=53913
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=57701
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=33357
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=36136
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=39509
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=39900
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=45174
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=45909
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=34521
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=49023
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=49526
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=53555
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=55694
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=56833
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=58251
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=59023
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=33687
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=35731
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=51581
wait: coda request in progress
wait: coda request in progress
Error(old rc): nRead=18, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=41371
wait: coda request in progress
Error(old rc): nRead=6, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=43198
wait: coda request in progress
Error(old rc): nRead=10, must be 1032
CODAtcpServer: start work thread
befor: socket=5 address>129.57.71.38< port=55260
wait: coda request in progress
Error(old rc): nRead=0, must be 1032
clasprod::EB1> ^C

Similar messages were coming from ER.

ET reported following: 

TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure

and another ET: 

.......
et_start: pthread_create(0x0000000d,...) done
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
TCP server got a connection so spawn thread
et ERROR: et_client_thread: read failure
et INFO: et_sys_heartmonitor, kill bad process (2,3063)
et INFO: et_sys_heartmonitor, cleanup process 2
et INFO: set_fix_nprocs, change # of ET processes from 2 to 2
et INFO: set_fix_natts, station GRAND_CENTRAL has 0 attachments
et INFO: set_fix_natts, station LEVEL3 has 1 attachments
et INFO: set_fix_natts, station ET2ER has 1 attachments
et INFO: set_fix_natts, # total attachments 2 -> 2
et INFO: set_fix_natts, proc 0 has 1 attachments
et INFO: set_fix_natts, proc 1 has 1 attachments

Also noticed that CODAs (production and test setup) do not like each other: reported following during 'configure': 

 Query test_ts2 table failed: Error reading table'test_ts2' definition
        ec3                                        ec3

If one runcontrol is restarted, then it works, but another one complains !!!

  • Sergey B. 31-mar-2008: 'run_log_comment.tcl' and 'rlComment' cannot recognize xml comments when extraction level1 trigger file name from <l1trig> tag, it seems using first line after <l1trig> tag without looking into "" comment sign.
  • Sergey B. 10-mar-2008: seems found error in run control: Xui/src.s/rcMenuWindow.cc parameters

XmNpaneMinimum and XmNpaneMaximum were both set to 480, as result run control gui area above log messages window was not big enough; set to 100 and 900 respectively, will ask Jie

  • 23-jan-2008: ER3 crashed several times during last 3 weeks, mostly (only ?) during 'End' transition; todays core file:
(dbx) where
  [1] 0xfe9e4c20(0x8068f9d), at 0xfe9e4c20 
  [2] codaExecute(0xce4fdbc0, 0xce4fdbc0, 0x1, 0x8068c39), at 0x8068f9d 
  [3] CODAtcpServerWorkTask(0x811fa00, 0x0, 0x0, 0xce4fdff8, 0xfea60020, 0xfe591400), at 0x8068d3a 
  [4] 0xfea5fd36(0xfe591400, 0x0, 0x0, ), at 0xfea5fd36 
  [5] 0xfea60020(), at 0xfea60020 
(dbx)
  • 14-nov-2007: first week of running G9A: crashes observed in ec1 (twice), tage3, scaler1, clastrig2, EB; no feather details were obtained so far
  • Sergey B. 3-nov-2007: after about 26Mevents during the run sc2pmc1 started to print following:
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000040 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000060 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000060 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000040 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000040 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000040 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000040 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000080 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x03C80ADD -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x8A90097F -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00000060 -> resyncronize !!!
ROC # 22 Event # 0 :  Bad Block Read signature 0x00680BD9 -> resyncronize !!!

end run failed. Reboot sc2. During end transition ec2 froze with message: 

interrupt: timer: 32 microsec (min=19 max=86 rms**2=18)
0x1a05fdf0 (twork0005): sfiUserEnd: INFO: Last Event 26723663, status=0 (0x1ca648c8 0x1ca648c0)
0x1a05fdf0 (twork0005): data: 0x00000003 0x0007014f 0x00120000 0x00000000 0xc8009181 0xc0001181
0x1a05fdf0 (twork0005): jw1 : 0x00000000 0x0197c54f 0x00000003 0x0007014f 0x00120000 0x00000000
0x1a05fdf0 (twork0005): Last DMA status = 0x200000b count=11 blen=11
0x1a05fdf0 (twork0006): sfiUserEnd: ERROR: Last Transfer Event NUMBER 26723663, status = 0x1a000 (0x90001181 0x88001181 0x80009181  0x78001181)
0x1a05fdf0 (twork0006): SFI_SEQ_ERR: Sequencer not Enabled

Reboot ec2. Started new run 55463, everything looks normal.

  • Sergey B. 2-nov-2007: during the run ec2 started to print on tsconnect screen:
Unknown error errno=65
Unknown error errno=65
Unknown error errno=65
Unknown error errno=65
Unknown error errno=65

data taking continues, but runcontrol printed message: 

WARN   : ec2 has not reported status for 1516 seconds
ERROR  : ec2 is in state disconnected should be active

ec2pmc1 looked fine; end run failed, need to reboot ec2

Retrieved from "https://clonwiki0.jlab.org/wiki/index.php?title=ERROR_Book&oldid=4710"