TO DO Lists

From CLONWiki
Revision as of 15:26, 28 September 2007 by Boiarino (talk | contribs)
Jump to navigation Jump to search

=

Sergey Boyarinov's TODO list

- shutting down clasonl1 with command 

shutdown -y -i 5 -g 120

got following 

Shutdown started.    Fri Sep 28 16:20:49 EDT 2007
Broadcast Message from root (pts/28) on clasonl1 Fri Sep 28 16:20:49...
The system clasonl1 will be shut down in 2 minutes
showmount: clasonl1: RPC: Program not registered
Broadcast Message from root (pts/28) on clasonl1 Fri Sep 28 16:21:49...
The system clasonl1 will be shut down in 1 minute
showmount: clasonl1: RPC: Program not registered
Broadcast Message from root (pts/28) on clasonl1 Fri Sep 28 16:22:19...
The system clasonl1 will be shut down in 30 seconds
showmount: clasonl1: RPC: Program not registered
Broadcast Message from root (pts/28) on clasonl1 Fri Sep 28 16:22:39...
THE SYSTEM clasonl1 IS BEING SHUT DOWN NOW ! ! !
Log off now or risk your files being damaged
showmount: clasonl1: RPC: Program not registered
Changing to init state 5 - please wait
clasonl1:/root>

Need to understand.

- v1190/v1290 testing: CBLT does not work, wrong slot number

- runcontrol does not compiles on clon10, but compiles on clon03 - new studio12 etc - need to install Sol10 U3 everywhere !; runcontrol hungs in 'go' for TDC_CALIB - working on it

- PCAL test setup (with Sergey P.) 

14-sep-2007: everything seems working, except missing delay cables and wierd
problem: FASTBUS hung on first event

26-sep-2007: replaced signal distr. card (TDC START did not work)

- write notes on standalone DAQ operations (enable signal necessity etc)

- get TIBCO license: 

17-sep-2007 requisition 266520 has been submitted

- equipment list with DB, lebles (with Sergey P.)

- JLAB discriminators: ask Volker to push it

- need 1881M ADCs, at least few modules

- test sy527 which arrived from repair (with George Jacobs)

- buy labels for both labeling machines 

17-sep-2007 requisitions 266507 and 266519 have been submitted

- ET system debugging (with Carl) 

clonpc7:/etc> ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
       inet 127.0.0.1 netmask 0xff000000 
       inet6 ::1 prefixlen 128 
       inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
       inet6 fe80::20d:93ff:fe65:ba7e%en0 prefixlen 64 scopeid 0x4 
       inet 129.57.68.7 netmask 0xffffff00 broadcast 129.57.68.255
       inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
       ether 00:0d:93:65:ba:7e 
       media: autoselect (100baseTX <full-duplex>) status: active
       supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP 
   <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
       ether 00:11:24:a1:d0:47 
       media: autoselect (<unknown type>) status: inactive
       supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
       lladdr 00:0d:93:ff:fe:65:ba:7e 
       media: autoselect <full-duplex> status: inactive
       supported media: autoselect <full-duplex>

ET system was confused: 

clonpc7:et> et_start -n 100 -s 10000 -f /tmp/test3
et_netinfo reached
et_netinfo: fully qualified default hostname >clonpc7.jlab.org<

ifi->ifi_flags = 0xffff8049
LOOPBACK INTERFACE
INTERFACE IS UP
ifi->ifi_addr = 0x00300300
hptr = 0x00300190
addr_in->sin_addr = 127.0.0.1,

ifi->ifi_flags = 0xffff8863
INTERFACE IS UP
ifi->ifi_addr = 0x00300350
hptr = 0x00300190
addr_in->sin_addr = 129.57.68.7,

ifi->ifi_flags = 0xffff8863
INTERFACE IS UP
ifi->ifi_addr = 0x003003a0
hptr = 0x00000000
addr_in->sin_addr = 192.168.2.1,

et_netinfo: address = 129.57.68.7
et_netinfo: error in gethostbyaddr
we've got 192.168.2.1, do not believe it is true
et_netinfo: address = 129.57.68.7
removing file >/tmp/test3<
file >/tmp/test3< removed
et_udpreceive: port=11111
et_udpreceive: port=11112
et_udpreceive: port=11112
et_udpreceive: port=11112
ET user library >/usr/local/clas/devel/coda/Darwin_powerpc/lib/libet_user.so< will be used


to eliminate alias 192.168.2.1 following command was used: 

ifconfig en0 -alias 192.168.2.1

Now it looks better: 

clonpc7:/etc> et_start -n 100 -s 10000 -f /tmp/test3
et_netinfo reached
et_netinfo: fully qualified default hostname >clonpc7.jlab.org<

ifi->ifi_flags = 0xffff8049
LOOPBACK INTERFACE
INTERFACE IS UP
ifi->ifi_addr = 0x00300300
hptr = 0x00300190
addr_in->sin_addr = 127.0.0.1,

ifi->ifi_flags = 0xffff8863
INTERFACE IS UP
ifi->ifi_addr = 0x00300350
hptr = 0x00300190
addr_in->sin_addr = 129.57.68.7,

et_netinfo: address = 129.57.68.7
removing file >/tmp/test3<
file >/tmp/test3< removed
et_udpreceive: port=11111
et_udpreceive: port=11112
ET user library >/usr/local/clas/devel/coda/Darwin_powerpc/lib/libet_user.so< will be used

- learn, start and test auto-shutdown software on clons

- on Nerses's request: install S99caRepeater and S99logServer scripts, update corresponding procedure for Solaris (ask Paul Letta if necessary) 

14-sep-2007: installed, but actial reboot was not tested

- fix colors for clasrun accounts (and others ?) on clons

- order 2 more discriminators for DVCSCAL

- make paper 'DVCSCAL trigger system' and pass it to Chris and Ben

- reply to Motorola about prpmc880

- on clonweb wrong apache is starting on reboot (check nagios and mrtg as well)

- on clon10 msql and rtserver must restart automatically on reboot

- nrpe did not restarted on clon06, it was in maintenance state; as clasrun I did disable and enable - it works now; probably network was down when it was trying to restart ?

- make sure emergency generator is by-passed if in service 

sent mail to Bob Rice Sep 26, 2007

Sergey Boyarinov's COMPLETED list

- replug AC power to emergency generators 

17-sep-2007: done

- NTP servers on Solaris, update Solaris post-install page (and Linux on clon04) 

24-sep-2007: done

=

Retrieved from "https://clonwiki0.jlab.org/wiki/index.php?title=TO_DO_Lists&oldid=2270"