Zedboard

# mounting *.bin on clonpc0:

mkdir tmp1
mkdir tmp2
mkdir tmp3
mkdir tmp5
mkdir tmp5

/sbin/kpartx -l zed_2013_11_14.bin
/sbin/kpartx -a -v zed_2013_11_14.bin

mount /dev/mapper/loop0p1 tmp1/
mount /dev/mapper/loop0p2 tmp2/
mount /dev/mapper/loop0p3 tmp3/
mount /dev/mapper/loop0p5 tmp5/
mount /dev/mapper/loop0p6 tmp6/

# now you see contants (R-only !!!???)
# after you are done:

umount tmp1
umount tmp2
umount tmp3
umount tmp5
umount tmp6

/sbin/kpartx -d -v zed_2013_11_14.bin

# burn to sd card:

# sdcard can be /dev/sdd, or /dev/sde, or something ...
dd if=zed_2013_11_14.bin of=/dev/sdd bs=1M

=====================================

/sbin/kpartx -a -v /dev/sdd

mount /dev/mapper/sdd1 tmp1/
mount /dev/mapper/sdd2 tmp2/
mount /dev/mapper/sdd3 tmp3/
mount /dev/mapper/sdd5 tmp5/
mount /dev/mapper/sdd6 tmp6/

umount partitions from clonpc0:

umount tmp1
umount tmp2
umount tmp3
umount tmp5
umount tmp6

if was mounted automatically:

umount /media/BOOT
umount /media/ARCHLINUX
umount /media/RTEMS
umount /media/USER
umount /media/disk

#our zedboard mac address:
# 00:0a:35:00:01:22

# slac mac address
# 08:00:56:00:88:99

====================

129 login: root
password: root

hostnamectl set-hostname zedboard1

ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT 
   link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT qlen 1000
   link/ether 08:00:56:00:88:99 brd ff:ff:ff:ff:ff:ff

ip link set eth0 down
###ip link set eth0 address 00:0a:35:00:01:22
ip link set eth0 up
ip addr add 129.57.86.63/24 dev eth0
ip route add default via 129.57.86.1

nano /etc/resolv.conf
nameserver 129.57.167.5
nameserver 129.57.167.14
nameserver 129.57.32.100
search jlab.org acc.jlab.org

systemctl stop dhcpcd.service
systemctl disable dhcpcd.service

export http_proxy="jprox.jlab.org:8082"

1. first update package list

pacman -Sy

1. now install what you need

pacman -S autofs

> In autofs5 --ghost option isn't valid. In order to start autofs you
> must remove that option from your /etc/conf.d/autofs.

# set /etc/autofs/auto.master and auto.misc

# start autofs
systemctl stop autofs
systemctl start autofs

# to start on boot
systemctl disable autofs
systemctl enable autofs

# see /usr/lib/systemd/system/autofs.service

pacman -S yp-tools ypbind-mt

ypdomainname CCCHP
#fix yp.conf 

# reboot here !!!

systemctl start rpcbind <- need only this for NFS ???
systemctl start ypbind

systemctl enable rpcbind
systemctl enable ypbind

pacman -S gcc

# git repository for CODA
git clone https://github.com/boiarino17/coda

# install GIT
pacman -S git

# ntp
systemctl start ntpd
systemctl enable ntpd
ntpd -q
ntpq -p
##ln -s /usr/share/zoneinfo/America/New_York localtime

#
pacman -S tcsh make openmotif libxpm

#  gtk2OA

# following does not work
pacman -Syu

# following does not work
pacman -S emacs

#
# mysql already there ???
#
## following instead of mysql ??? (installs mariadb)
#pacman -S mysql
#

# find /usr/include -name iostream -type f -print
# /usr/include/c++/4.7.2/iostream

# dec 3, 2013 on Ryan advise:
export http_proxy="jprox.jlab.org:8082"
pacman -Syu # update the archlinux packages
pacman -S nfs-utils # install nfs-utils
pacman -S adduser # correct version of adduser (useradd does not work)
mount -t nfs -o nolock clonfs1:/vol/apps/Linux_armv7l /apps
mount -t nfs -o nolock clonfs1:/vol/local/Linux_armv7l /usr/local
mount -t nfs -o nolock clonfs1:/vol/clas12 /usr/clas12
mount -t nfs -o nolock clonfs1:/vol/home /home
mount -t nfs -o nolock clonfs1:/vol/work /work