Akcp
AKCP is ethernet-based devices to monotor temperature, humidity etc. Web site is http://www.akcp.com.
Documentation: Manual(pdf) MIBs(pdf)
Initial settings:
Device comes with default IP address 192.168.0.100. To change it, do following (example for the MAC OS X):
- connect it to laptop ethernet port
- in system preferences->network set Configure IPv4: Manually, IP Address: 192.168.0.1
- open web browser and goto http://192.168.0.100/
- login as Administrator, pass public
- click Network and set desired values for IP
- click Save
- choose US Eastern Time, set current time manually, choose Once an hour, set NTP servers ntp1.jlab.org and ntp2.jlab.org
- click Save
From now on all settings can be done over the web from any computer (inside firewall of course)