Akcp

AKCP is ethernet-based devices to monotor temperature, humidity etc. Web site is http://www.akcp.com.

Documentation: Manual(pdf) MIBs(pdf)

Initial settings:

Device comes with default IP address 192.168.0.100. To change it, do following (example for the MAC OS X):

• connect it to laptop ethernet port
• in system preferences->network set Configure IPv4: Manually, IP Address: 192.168.0.1
• open web browser and goto http://192.168.0.100/
• login as Administrator, pass public
• click Network and set desired values for IP
• click Save
• choose US Eastern Time, set current time manually, choose Once an hour, set NTP servers ntp1.jlab.org and ntp2.jlab.org
• click Save

From now on all settings can be done over the web from any computer (inside firewall of course)

Time settings: