EPICS: Software IOC for CAEN HV

Term software IOC is used to distinguish UNIX-based IOC from VXWORKS-based one. In case of CAEN HV that classification is not quite accurate. Originally EPICS support in CLAS was provided for new CAEN SY1527 mainframes, it was UNIX-based IOC talking to mainframes over TCP connection. Later that software was ported to VxWorks and adopted to control old CAEN SY527 mainframes over VME V288 CAENET controller.

SY527

Old CAEN SY527 HV system is used in Drift Chamber (3 mainframes, IOC in dccntrl VME crate) and in Large Angle Calorimater (4 mainframes, IOC in camac2 VME crate). IOC source code is located in $BASEB/src/iocsy527App/, boot scripts in $IOC/dccntrl and $IOC/camac2.

SY1527

To start IOC:

 cd $BASEB/src/CAEN_HV/IocShell/
 ./startup.all

Contents of 'startup.all' for references:

 #!/usr/local/clas/devel/R3.14.8.2/EPICS/baseB/bin/linux-x86/ioccaen
 #
 #  startup.all test for linux ioc
 #
 < envPaths
 #
 cd ${TOP}
 #
 dbLoadDatabase("src/CAEN_HV/IocShell/O.Common/ioccaen.dbd",0,0)
 ioccaen_registerRecordDeviceDriver(pdbbase)
 Init_CAEN()
 Start_CAEN(1,"129.57.69.101")
 #
 dbLoadRecords("src/CAEN_HV/IocShell/caen_01.db")
 #
 iocInit()
 #
 # end of linux ioc startup script

Contents of 'envPaths' (for references):

 epicsEnvSet(ARCH,"linux-x86")
 epicsEnvSet(IOC,"CAEN_HV")
 epicsEnvSet(TOP,"/usr/local/clas/devel/R3.14.8.2/EPICS/baseB")