Abaco XVB603

From CLONWiki
Revision as of 14:13, 2 June 2025 by Boiarino (talk | contribs)
Jump to navigation Jump to search

Initial setting:

In BIOS, go to Advanced->Network Stack Configuration and enable Network Stack and Ipv4 PXE Support.

In BIOS, go to Abaco->VMEbus Configuration and set Reserve VME Space to 512 MBytes.

In BIOS, go to Abaco->Network Boot Configuration and enable PXE ROM - ETH3 and PXE ROM - ETH4.

Save & Exit

Recycle power, it should be ready for PXE boot. If not, in BIOS, go to Boot and set appropriate network port(s) in BOOT Option #1 (and #2), disable others.

Retrieved from "https://clonwiki0.jlab.org/wiki/index.php?title=Abaco_XVB603&oldid=8313"