Zedboard
# mounting *.bin on clonpc0:
mkdir tmp1 mkdir tmp2 mkdir tmp3 mkdir tmp5 mkdir tmp5
/sbin/kpartx -l zed_2013_11_14.bin /sbin/kpartx -a -v zed_2013_11_14.bin
mount /dev/mapper/loop0p1 tmp1/ mount /dev/mapper/loop0p2 tmp2/ mount /dev/mapper/loop0p3 tmp3/ mount /dev/mapper/loop0p5 tmp5/ mount /dev/mapper/loop0p6 tmp6/
# now you see contants (R-only !!!???) # after you are done:
umount tmp1 umount tmp2 umount tmp3 umount tmp5 umount tmp6
/sbin/kpartx -d -v zed_2013_11_14.bin
# burn to sd card:
# sdcard can be /dev/sdd, or /dev/sde, or something ... dd if=zed_2013_11_14.bin of=/dev/sdd bs=1M
=====================================
/sbin/kpartx -a -v /dev/sdd
mount /dev/mapper/sdd1 tmp1/ mount /dev/mapper/sdd2 tmp2/ mount /dev/mapper/sdd3 tmp3/ mount /dev/mapper/sdd5 tmp5/ mount /dev/mapper/sdd6 tmp6/
umount partitions from clonpc0:
umount tmp1 umount tmp2 umount tmp3 umount tmp5 umount tmp6
if was mounted automatically:
umount /media/BOOT umount /media/ARCHLINUX umount /media/RTEMS umount /media/USER umount /media/disk
#our zedboard mac address: # 00:0a:35:00:01:22
# slac mac address # 08:00:56:00:88:99
====================
129 login: root password: root
hostnamectl set-hostname zedboard1
ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT qlen 1000 link/ether 08:00:56:00:88:99 brd ff:ff:ff:ff:ff:ff
ip link set eth0 down ###ip link set eth0 address 00:0a:35:00:01:22 ip link set eth0 up ip addr add 129.57.86.63/24 dev eth0 ip route add default via 129.57.86.1
nano /etc/resolv.conf nameserver 129.57.167.5 nameserver 129.57.167.14 nameserver 129.57.32.100 search jlab.org acc.jlab.org
systemctl stop dhcpcd.service systemctl disable dhcpcd.service
export http_proxy="jprox.jlab.org:8082"
- first update package list
pacman -Sy
- now install what you need
pacman -S autofs
> In autofs5 --ghost option isn't valid. In order to start autofs you > must remove that option from your /etc/conf.d/autofs.
# set /etc/autofs/auto.master and auto.misc
# start autofs systemctl stop autofs systemctl start autofs
# to start on boot systemctl disable autofs systemctl enable autofs
# see /usr/lib/systemd/system/autofs.service
pacman -S yp-tools ypbind-mt
ypdomainname CCCHP #fix yp.conf
# reboot here !!!
systemctl start rpcbind <- need only this for NFS ??? systemctl start ypbind
systemctl enable rpcbind systemctl enable ypbind
pacman -S gcc
# git repository for CODA git clone https://github.com/boiarino17/coda
# install GIT pacman -S git
# ntp systemctl start ntpd systemctl enable ntpd ntpd -q ntpq -p ##ln -s /usr/share/zoneinfo/America/New_York localtime
# pacman -S tcsh make openmotif libxpm
# gtk2OA
# following does not work pacman -Syu
# following does not work pacman -S emacs
# # mysql already there ??? # ## following instead of mysql ??? (installs mariadb) #pacman -S mysql #
# find /usr/include -name iostream -type f -print # /usr/include/c++/4.7.2/iostream
# dec 3, 2013 on Ryan advise: export http_proxy="jprox.jlab.org:8082" pacman -Syu # update the archlinux packages pacman -S nfs-utils # install nfs-utils pacman -S adduser # correct version of adduser (useradd does not work) mount -t nfs -o nolock clonfs1:/vol/apps/Linux_armv7l /apps mount -t nfs -o nolock clonfs1:/vol/local/Linux_armv7l /usr/local mount -t nfs -o nolock clonfs1:/vol/clas12 /usr/clas12 mount -t nfs -o nolock clonfs1:/vol/home /home mount -t nfs -o nolock clonfs1-old:/vol/work /work