Concurrent VME controllers: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
'''Concurrent Technologies VP-E2x''' | '''Concurrent Technologies VP-E2x''' | ||
''NOTE:'' if BIOS is hunged or not accessable, load the BIOS with the "optimal defaults" using | ''NOTE:'' if BIOS is hunged or not accessable, load the BIOS with the "optimal defaults" using [https://clonwiki0.jlab.org/wiki/clondocs/Docs/vp_e2x_msd_switches.png SW7-2] in the ON position. Save changes as "custom defaults" and put switch into previous position. | ||
Bios setup for VP-E2x | Bios setup for VP-E2x | ||
Revision as of 13:16, 2 December 2025
Concurrent Technologies VP-E2x
NOTE: if BIOS is hunged or not accessable, load the BIOS with the "optimal defaults" using SW7-2 in the ON position. Save changes as "custom defaults" and put switch into previous position.
Bios setup for VP-E2x
In the BIOS (F2 as it boots):
Main -> Boot Features ->
Auto-retry On Boot Fail : Enabled
PXE Boot : Enabled
Front Panel ETH A : Enabled
Advanced -> Miscellaneous Configuration
PCI MMIO Size : <1.25 GB>
VME ->
Outbound Reserved Size : <256 MB>
Inbound Reserved Size : <16MB>
Exit ->
Exit Saving Changes
F2 again for BIOS
Boot ->
Boot Type : Legacy Boot Type
Legacy ->
Normal Boot Menu : Advanced
IBA GE Slot 0103 v1594 (should be listed below "Normal Boot Menu")
Exit ->
Exit Saving Changes