Abaco XVB603: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
'''Initial setting:''' | '''Initial setting:''' | ||
Unplug ethernet cable. | |||
In BIOS, go to '''Advanced->Network Stack Configuration''' and enable '''Network Stack''' and '''Ipv4 PXE Support'''. | In BIOS, go to '''Advanced->Network Stack Configuration''' and enable '''Network Stack''' and '''Ipv4 PXE Support'''. | ||
| Line 10: | Line 12: | ||
'''Save & Exit''' | '''Save & Exit''' | ||
Recycle power, it should | Connect ethernet cable to the top port. Recycle power, it should boot (if not, in BIOS, go to '''Boot''' and set appropriate network port(s) in BOOT Option #1 (and #2), disable others). | ||
Revision as of 14:28, 2 June 2025
Initial setting:
Unplug ethernet cable.
In BIOS, go to Advanced->Network Stack Configuration and enable Network Stack and Ipv4 PXE Support.
In BIOS, go to Abaco->VMEbus Configuration and set Reserve VME Space to 512 MBytes.
In BIOS, go to Abaco->Network Boot Configuration and enable PXE ROM - ETH3 and PXE ROM - ETH4.
Save & Exit
Connect ethernet cable to the top port. Recycle power, it should boot (if not, in BIOS, go to Boot and set appropriate network port(s) in BOOT Option #1 (and #2), disable others).