November 29, 2017 online meeting minutes: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
present: Sergey Boyarinov, Valery, Rafo, Cole, Raffaella | present: Sergey Boyarinov, Valery, Rafo, Cole, Raffaella, Ben, Stepan, Nathan, Pasyuk | ||
1. DAQ/Trigger: | 1. DAQ/Trigger: | ||
| Line 5: | Line 5: | ||
* what is ready: PROD config contains 'almost' everything (all VME crates, FC VTP boards), run with 60KHz random pulser and block_level=40, got 16kHz/200MByte/sec | * what is ready: PROD config contains 'almost' everything (all VME crates, FC VTP boards), run with 60KHz random pulser and block_level=40, got 16kHz/200MByte/sec | ||
* what is missing: | * what is missing: scaler1 crate commissioning, Stepan will help with helicity signals, will do it after meeting;, 1KHz will be connected to TS, readout scaler1 only on corresponding event type; check faraday etc are connected | ||
* one FTOF VTP is missing, may take one from CND | |||
2. DAQ and Trigger commissioning plans | 2. DAQ and Trigger commissioning plans | ||
* DAQ | * DAQ: rols info - text, histos; test subset of ROCs separately for performance purposes; check if all data in data stream, EPICS and RCDB; test mode 7 at some point | ||
* Trigger | * Trigger: offline reconstruction must be running (all trig banks); <det>mon has pulse histogram, will be running from 1 trigger bit and set timing; delay scan using scalers will be done; cluster energy histogram to control energy threshold, Cole knows scale from cosmic; run with different conditions and record data for offline analysis, will prepare trigger config file for every trigger setting | ||
Revision as of 10:51, 29 November 2017
present: Sergey Boyarinov, Valery, Rafo, Cole, Raffaella, Ben, Stepan, Nathan, Pasyuk
1. DAQ/Trigger:
- what is ready: PROD config contains 'almost' everything (all VME crates, FC VTP boards), run with 60KHz random pulser and block_level=40, got 16kHz/200MByte/sec
- what is missing: scaler1 crate commissioning, Stepan will help with helicity signals, will do it after meeting;, 1KHz will be connected to TS, readout scaler1 only on corresponding event type; check faraday etc are connected
- one FTOF VTP is missing, may take one from CND
2. DAQ and Trigger commissioning plans
- DAQ: rols info - text, histos; test subset of ROCs separately for performance purposes; check if all data in data stream, EPICS and RCDB; test mode 7 at some point
- Trigger: offline reconstruction must be running (all trig banks); <det>mon has pulse histogram, will be running from 1 trigger bit and set timing; delay scan using scalers will be done; cluster energy histogram to control energy threshold, Cole knows scale from cosmic; run with different conditions and record data for offline analysis, will prepare trigger config file for every trigger setting