Mellanox: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
'''RHEL7''' | '''RHEL7''' | ||
'''NOTE:''' RHEL7.1 seems has driver installed already, proceed with '/sbin/connectx_port_config' | '''NOTE:''' RHEL7.1 seems has driver installed already, proceed with '/sbin/connectx_port_config' using port 'p6p2' | ||
Run | Run | ||
Revision as of 11:14, 14 September 2015
RHEL7
NOTE: RHEL7.1 seems has driver installed already, proceed with '/sbin/connectx_port_config' using port 'p6p2'
Run
yum install numactl
cd /root cp /usr/downloads/MLNX_OFED_LINUX-2.4-1.0.4-rhel7.1-x86_64.iso . mkdir tmp mount -o loop MLNX_OFED_LINUX-2.4-1.0.4-rhel7.1-x86_64.iso tmp cd tmp ./mlnxofedinstall
Run command
/sbin/connectx_port_config --show
to display port settings, change it with
/sbin/connectx_port_config
setting all ports to 'eth'.
Configure new 'eth' port as desired (left port seems p6p2 now ...). Use for example text interface to NetworkManager called 'nmtui'.
RHEL6: Atfer it installed, run /usr/bin/system-config-network and setup p6p1 device as manual network with appropriate settings. Shutdown computer, unplug copper cable and start computer, 10G fiber link should become default one.