Mellanox: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 17: | Line 17: | ||
setting all ports to 'eth'. | setting all ports to 'eth'. | ||
Configure new 'eth' port as desired (left port seems p6p2 now ...). Use for example text interface to NetworkManager called nmtui'. | Configure new 'eth' port as desired (left port seems p6p2 now ...). Use for example text interface to NetworkManager called 'nmtui'. | ||
'''RHEL6:''' Atfer it installed, run ''/usr/bin/system-config-network'' and setup ''p6p1'' device as manual network with appropriate settings. Shutdown computer, unplug copper cable and start computer, | '''RHEL6:''' Atfer it installed, run ''/usr/bin/system-config-network'' and setup ''p6p1'' device as manual network with appropriate settings. Shutdown computer, unplug copper cable and start computer, | ||
10G fiber link should become default one. | 10G fiber link should become default one. | ||
Revision as of 11:00, 14 September 2015
RHEL7
Run
yum install numactl
cd /root cp /usr/downloads/MLNX_OFED_LINUX-2.4-1.0.4-rhel7.1-x86_64.iso . mkdir tmp mount -o loop MLNX_OFED_LINUX-2.4-1.0.4-rhel7.1-x86_64.iso tmp cd tmp ./mlnxofedinstall
Run command
/sbin/connectx_port_config --show
to display port settings, change it with
/sbin/connectx_port_config
setting all ports to 'eth'.
Configure new 'eth' port as desired (left port seems p6p2 now ...). Use for example text interface to NetworkManager called 'nmtui'.
RHEL6: Atfer it installed, run /usr/bin/system-config-network and setup p6p1 device as manual network with appropriate settings. Shutdown computer, unplug copper cable and start computer, 10G fiber link should become default one.