Mellanox: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
./mlnxofedinstall | ./mlnxofedinstall | ||
Atfer it installed, run ''/usr/bin/system-config-network'' and setup ''p6p1'' device as manual network with appropriate settings. Shutdown computer, unplug copper cable and start computer, | Run command | ||
/sbin/connectx_port_config --show | |||
to display port settings, change it with | |||
/sbin/connectx_port_config | |||
setting first port to 'eth' and second to 'ib' | |||
Configure new 'eth' port as desired. | |||
'''NOTE:''' RHEL6: Atfer it installed, run ''/usr/bin/system-config-network'' and setup ''p6p1'' device as manual network with appropriate settings. Shutdown computer, unplug copper cable and start computer, | |||
10G fiber link should become default one. | 10G fiber link should become default one. | ||
'''NOTE:''' on RHEL7 do 'modprobe -r ib_isert' and '/etc/init.d/openibd restart' ??? Network interface is 'nmtui' | ''' ??? NOTE:''' on RHEL7 do 'modprobe -r ib_isert' and '/etc/init.d/openibd restart' ??? Network interface is 'nmtui' | ||
Revision as of 20:56, 10 September 2015
NOTE: On RHEL7 run yum install numactl.
cd /root cp /usr/downloads/MLNX_OFED_LINUX-2.4-1.0.4-rhel7.1-x86_64.iso . mkdir tmp mount -o loop MLNX_OFED_LINUX-2.4-1.0.4-rhel7.1-x86_64.iso tmp cd tmp ./mlnxofedinstall
Run command
/sbin/connectx_port_config --show
to display port settings, change it with
/sbin/connectx_port_config
setting first port to 'eth' and second to 'ib'
Configure new 'eth' port as desired.
NOTE: RHEL6: Atfer it installed, run /usr/bin/system-config-network and setup p6p1 device as manual network with appropriate settings. Shutdown computer, unplug copper cable and start computer, 10G fiber link should become default one.
??? NOTE: on RHEL7 do 'modprobe -r ib_isert' and '/etc/init.d/openibd restart' ??? Network interface is 'nmtui'