December 7, 2011 online meeting minutes: Difference between revisions

From CLONWiki
Jump to navigation Jump to search
← Older editNewer edit →
No edit summary
No edit summary
Line 9: Line 9:
* Hall D test setup runs well, they are fixing FADC etc bugs
* Hall D test setup runs well, they are fixing FADC etc bugs


* DVCS: GUI had a bug - fixed; tcpServer server bug - fixed temporary, permanent solution is needed; Ben is tuning cables, will be ready for installation in the Hall today; temperature control: NI control device shows some trouble, FX is debugging, clonwin3 is installed and ready; Nerses will port jlab discr on vxWorks, Sergey will provide mv2432 CPU; FX took pedestal run and we have beam data; with current CLAS trigger almost no useful events, we need DVCS trigger input; we have 8 dead channels and 10 noisy channels, and some channels (25) have pedestal problem
* DVCS: GUI had a bug - fixed; tcpServer server bug - fixed temporary, permanent solution is needed; Ben is tuning cables, will be ready for installation in the Hall today; temperature control: NI control device shows some trouble, FX is debugging, clonwin3 is installed and ready; Nerses will port jlab discr on vxWorks, Sergey will provide mv2432 CPU; FX took pedestal run and we have beam data; with current CLAS trigger almost no useful events, we need DVCS trigger to be in CLAS trigger, will discuss with Ben what the best way; we have 8 dead channels and 10 noisy channels, and some channels (25) have pedestal problem

Revision as of 10:38, 7 December 2011

present: Sergey Boyarinov, Sergey Pozdnyakov, FX, Nerses

1. g14b: L1 was 16KHz, now 11kHz after yesterday fixes in TOF, accepted rate 4kHz, L2 accepts 30%, livetime aroun 83%; L2RESET need check; fans replacemnt continues, 7 more fastbus crates to go; Franz is working on helicity correction; occupancy control program will be tested

2. Test setups:

  • DCRB test: got 20Mevents, will analyze
  • Hall D test setup runs well, they are fixing FADC etc bugs
  • DVCS: GUI had a bug - fixed; tcpServer server bug - fixed temporary, permanent solution is needed; Ben is tuning cables, will be ready for installation in the Hall today; temperature control: NI control device shows some trouble, FX is debugging, clonwin3 is installed and ready; Nerses will port jlab discr on vxWorks, Sergey will provide mv2432 CPU; FX took pedestal run and we have beam data; with current CLAS trigger almost no useful events, we need DVCS trigger to be in CLAS trigger, will discuss with Ben what the best way; we have 8 dead channels and 10 noisy channels, and some channels (25) have pedestal problem
Retrieved from "https://clonwiki0.jlab.org/wiki/index.php?title=December_7,_2011_online_meeting_minutes&oldid=5666"