JLAB TS2: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 15: | Line 15: | ||
* Enter (16-bit hex) interface address ('0' to quit) - 0ed0 | * Enter (16-bit hex) interface address ('0' to quit) - 0ed0 | ||
2. On TS2, run ''ts2_link'': | 2. On SFI ROC, run ''sfi_link'' | ||
3. On TS2, run ''ts2_link'': | |||
* Enable FAST L1 mode? (1 = yes, 0 = no) - 0 | * Enable FAST L1 mode? (1 = yes, 0 = no) - 0 | ||
* Enter ROC buffer mode (1 = buffer, 0 = lock) - 0 | * Enter ROC buffer mode (1 = buffer, 0 = lock) - 0 | ||
| Line 21: | Line 23: | ||
* type 'g' and <enter> | * type 'g' and <enter> | ||
4. When done, type 'q' and <enter> on both | |||
Revision as of 11:47, 10 October 2011
Manual for old TS in (ps)
Manual for old TS in (pdf)
Manual for new TS2 in (doc)
Manual for new TS2 in (pdf)
Branches testing procedure
1. On VME ROC, run vme_link:
- Enter (16-bit hex) interface address ('0' to quit) - 0ed0
2. On SFI ROC, run sfi_link
3. On TS2, run ts2_link:
- Enable FAST L1 mode? (1 = yes, 0 = no) - 0
- Enter ROC buffer mode (1 = buffer, 0 = lock) - 0
- Enter (hex) ROC enable pattern ('0' to quit) - xxxxxxx (roc mask)
- type 'g' and <enter>
4. When done, type 'q' and <enter> on both