Akcp: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 9: | Line 9: | ||
Device comes with default IP address 192.168.0.100. To change it, do following (example for the MAC OS X): | Device comes with default IP address 192.168.0.100. To change it, do following (example for the MAC OS X): | ||
* connect it to laptop ethernet port | * connect it to laptop ethernet port | ||
* in '''system preferences->network''' set ''Configure IPv4: Manually'', ''IP Address: 192.168.0.1 | * in '''system preferences->network''' set ''Configure IPv4: Manually'', ''IP Address: 192.168.0.1'' | ||
* open web browser and goto http://192.168.0.100/ | * open web browser and goto http://192.168.0.100/ | ||
* login as ''Administrator'', pass ''public'' | * login as ''Administrator'', pass ''public'' | ||
Revision as of 10:45, 9 June 2011
AKCP is ethernet-based devices to monotor temperature, humidity etc. Web site is http://www.akcp.com.
Documentation:
Initial settings:
Device comes with default IP address 192.168.0.100. To change it, do following (example for the MAC OS X):
- connect it to laptop ethernet port
- in system preferences->network set Configure IPv4: Manually, IP Address: 192.168.0.1
- open web browser and goto http://192.168.0.100/
- login as Administrator, pass public
- click Network and set desired values for IP
- click Save
- choose US Eastern Time, set current time manually, choose Once an hour, set NTP servers ntp1.jlab.org and ntp2.jlab.org
- click Save
From now on all settings can be done over the web from any computer (inside firewall of course)
Time settings: