New CLAS Level1 Trigger System: Difference between revisions

From CLONWiki
Jump to navigation Jump to search
← Older editNewer edit →
No edit summary
No edit summary
Line 33: Line 33:
'''CAEN1495 LUTs, photon version'''
'''CAEN1495 LUTs, photon version'''


ECP LUT has 6 STOF inputs and 6 ECP inputs, and one output. To generate lookup table program ''level1lookupmaker'' must be used. It will take config file name WITHOUT extension assuming extension ''trg'', and will generate file with the same name and extension ''lut'' in current directory. Config file should has one line with logical equation using STOF1..STOF6 and ECP1..ECP6 names for 12 inputs. Logical AND represented by 'x' and logical OR - by '||', for example:
* L1 ECP LUT has 6 STOF inputs and 6 ECP inputs, and one output. To generate lookup table program ''level1lookupmaker'' must be used. It will take config file name WITHOUT extension assuming extension ''trg'', and will generate file with the same name and extension ''lut'' in current directory. Config file should has one line with logical equation using STOF1..STOF6 and ECP1..ECP6 names for 12 inputs. Logical AND represented by 'x' and logical OR - by '||', for example:


  ECP1xSTOF2||ECP1xSTOF3||STOF1xSTOF4||
  ECP1xSTOF2||ECP1xSTOF3||STOF1xSTOF4||
Line 39: Line 39:
'''NOTE:''' line must be ended by ||.
'''NOTE:''' line must be ended by ||.


ECC LUT works the same way, replacing ECP by ECC, for example:
* L1 ECC LUT works the same way, if ECP replaced by ECC, for example:


  ECC1xSTOF2||ECC1xSTOF3||STOF1xSTOF4||
  ECC1xSTOF2||ECC1xSTOF3||STOF1xSTOF4||


L2 LUT has 12 inputs from 12 trigger bits, and 4 outputs connected to the level2 MLU board. To generate lookup table program ''level2lookupmaker'' must be used. It will take config file name WITHOUT extension assuming extension ''trg'', and will generate file with the same name and extension ''lut'' in current directory. Config file should contains 4 lines with logical equations, representing desired results on each of 4 output lines, for example:  
* L2 TRG LUT has 12 inputs from 12 trigger bits, and 4 outputs connected to the level2 MLU board. To generate lookup table program ''level2lookupmaker'' must be used. It will take config file name WITHOUT extension assuming extension ''trg'', and will generate file with the same name and extension ''lut'' in current directory. Config file should contains 4 lines with logical equations, representing desired results on each of 4 output lines, for example:  


  TRG11xTRG12||TRG3xTRG4||
  TRG11xTRG12||TRG3xTRG4||
Line 52: Line 52:
'''NOTE:''' it is possible that more then one output will have a signal for the particular event, it must be taken into account programming level2 mlu board.
'''NOTE:''' it is possible that more then one output will have a signal for the particular event, it must be taken into account programming level2 mlu board.


L2SEC LUT represents 8 possible combinations of 3 detectors: STOF, ECP and ECC. Config files tag is TS_L2_SECLOGIC following by the number representing LUT contents. If one of those detectors must be used alone, corresponding vertical column must be converted to decimal number and used in config file. If OR or AND logic must be implemented, corresponding operation must be performed in every of 8 lines, and resulting column converted to the decimal number as well. Following diagram explains how it works:
* L2 SEC LUT represents 8 possible combinations of 3 detectors: STOF, ECP and ECC. Config files tag is TS_L2_SECLOGIC following by the number representing LUT contents. If one of those detectors must be used alone, corresponding vertical column must be converted to decimal number and used in config file. If OR or AND logic must be implemented, corresponding operation must be performed in every of 8 lines, and resulting column converted to the decimal number as well. Following diagram explains how it works:


       ECC  ECP  STOF  | ECC|ECP ECC|STOF ECP|STOF ECC|ECP|STOF ECC&ECP ECC&STOF ECP&STOF ECC&ECP&STOF
       ECC  ECP  STOF  | ECC|ECP ECC|STOF ECP|STOF ECC|ECP|STOF ECC&ECP ECC&STOF ECP&STOF ECC&ECP&STOF

Revision as of 17:25, 3 November 2010

During G12 run preparations on spring 2008 we decided to upgrade photon part of CLAS Level1 trigger system using CAEN v1495 logic unit. Eventually those efforts resulted in full Level1 system replacement: 6 level1 router boards and event processor board were replaced with one single v1495 unit equipped with 2 extra daughter modules. Trigger was commissioned during first phase of G12 run, last significant change was applied April 20, 2008. Most of the job was completed by Ben Raydo from Fast Electronics group. Valery Kubarovsky and Pawel Nadel-Turonski made generic trigger design and conducted trigger testing. Sergey Boyarinov, Ivan Bedlinskiy, Nerses Gevorgyan and Hovanes Egiyan integrated new hardware and software components into CLAS online and slow control systems. Technical assistance was provided by Fast Electronic Group and CODA Group personal. Current document contains basic information about the system.

  • v1495-based logic: see GUI snapshots below; total propagation time is about 75ns, similar to old Level1 system
  • Windows-based control GUI (see snapshot1, snapshot2 and snapshot3) were developed by Ben Raydo; it displays basic trigger logic and allows user to control and monitor various parts of the system using controlled logic elements, delays and lookup tables; built-in scalers are providing useful information about system functionality; system includes an multi-channel logic analyzer which was extremely useful to set appropriate delays (see snapshot1, snapshot2, snapshot3 and snapshot4)
  • system incorporation into CLAS Online and Slow control: 9 OR modules were installed in sc2 crate, controlling script was provided to set appropriate masks into those units; v1495 was installed into clastrig2 trigger supervisor crate, and tcp server was developed and started under vxWorks to provide communication with Windows GUI and any other control and monitoring software running on UNIX machines; vxWorks timer-driven process is reading and reseting v1495 scalers every second placing data into semaphore-protected memory, so EPICS-related functions can extract necessary information from there; to provide EPICS support EPICS IOC was lunched along with CODA in clastrig2 crate, both systems are running together without problems (clastrig2 'i' command snapshot); EPICS GUIs were developed (see snapshot1 and snapshot2) to display trigger system scalers; Windows-based GUI was installed on clonwin2 desktop which was accessed using remote desktop software from clon04 Linux machine

March 2010 new photon version

Contains new Level2-related features and some small changes. Ben's email: 

Hi Sergey,
See the attachments for the new module revision. The main changes have been
switching over the a 32bit VME interface, which made the firmware a bit easier to
write/compile and should simplify your 32bit scalar readout. This module will only
support 32bit VME transcactions (not 16bit).
Take a look at the attached TCP/VME server - I've mainly added 32bit vme messages.
If you use this file you'll need to add your controls for when EPICS is actively
reading out scalars (redirect the scalar address range to read from EPICS instead of
the VME module, but when EPICS isn't active allow the VME commands to read directly
from the module - be sure to include the scalar control register!).
I've got the GUI ready to go and the VME firmware is just about ready (just needs to
finish compiling) if you want to test soon (probably tomorrow is best still).
Ben

Manual: pdf.

Some notes

CAEN1495 LUTs, photon version

  • L1 ECP LUT has 6 STOF inputs and 6 ECP inputs, and one output. To generate lookup table program level1lookupmaker must be used. It will take config file name WITHOUT extension assuming extension trg, and will generate file with the same name and extension lut in current directory. Config file should has one line with logical equation using STOF1..STOF6 and ECP1..ECP6 names for 12 inputs. Logical AND represented by 'x' and logical OR - by '||', for example:
ECP1xSTOF2||ECP1xSTOF3||STOF1xSTOF4||

NOTE: line must be ended by ||.

  • L1 ECC LUT works the same way, if ECP replaced by ECC, for example:
ECC1xSTOF2||ECC1xSTOF3||STOF1xSTOF4||
  • L2 TRG LUT has 12 inputs from 12 trigger bits, and 4 outputs connected to the level2 MLU board. To generate lookup table program level2lookupmaker must be used. It will take config file name WITHOUT extension assuming extension trg, and will generate file with the same name and extension lut in current directory. Config file should contains 4 lines with logical equations, representing desired results on each of 4 output lines, for example:
TRG11xTRG12||TRG3xTRG4||
TRG1xTRG2||
TRG4||
TRG8||

NOTE: it is possible that more then one output will have a signal for the particular event, it must be taken into account programming level2 mlu board.

  • L2 SEC LUT represents 8 possible combinations of 3 detectors: STOF, ECP and ECC. Config files tag is TS_L2_SECLOGIC following by the number representing LUT contents. If one of those detectors must be used alone, corresponding vertical column must be converted to decimal number and used in config file. If OR or AND logic must be implemented, corresponding operation must be performed in every of 8 lines, and resulting column converted to the decimal number as well. Following diagram explains how it works:
      ECC   ECP   STOF  | ECC|ECP ECC|STOF ECP|STOF ECC|ECP|STOF ECC&ECP ECC&STOF ECP&STOF ECC&ECP&STOF
       0     0     0    |    0       0        0          0          0       0        0          0
       0     0     1    |    0       1        1          1          0       0        0          0
       0     1     0    |    1       0        1          1          0       0        0          0
       0     1     1    |    1       1        1          1          0       0        1          0
       1     0     0    |    1       1        0          1          0       0        0          0
       1     0     1    |    1       1        1          1          0       1        0          0
       1     1     0    |    1       1        1          1          1       0        0          0
       1     1     1    |    1       1        1          1          1       1        1          1
hex:  0xF0  0xCC  0xAA  |   0xFC    0xFA     0xEE       0xFE       0xC0    0xA0     0x88       0x80
dec:   240   204   170       252     250      238        254        192     160      136        128   <--- to be used in config file
Retrieved from "https://clonwiki0.jlab.org/wiki/index.php?title=New_CLAS_Level1_Trigger_System&oldid=5008"