October 15, 2008 online meeting minutes: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
present: Sergey Boyarinov, Valeri, Ben, Chris Cuevas, Penn, Sergey | present: Sergey Boyarinov, Valeri, Ben, Chris Cuevas, Penn, Sergey, Pawel | ||
* DVCS-CLAS trigger | * DVCS-CLAS trigger | ||
| Line 9: | Line 9: | ||
forward carreage is in position and DVCS-CLASTRIG cable was can to the nominal length, signal is in gate about 30ns from | forward carreage is in position and DVCS-CLASTRIG cable was can to the nominal length, signal is in gate about 30ns from | ||
the beginning of the gate pulse, gate cables is in production, hope to get another 20ns | the beginning of the gate pulse, gate cables is in production, hope to get another 20ns; we will make gate-signal coincidence curve with DVCS laser with DAQ | ||
EPICS readout for scalers in both CLASTRIG2 and DVCSTRIG is working, scaler histograms and corresponding MEDM GUIs to be checked; normally all scalers will be reported in Hz; all quadrons counts equally | EPICS readout for scalers in both CLASTRIG2 and DVCSTRIG is working, scaler histograms and corresponding MEDM GUIs to be checked; normally all scalers will be reported in Hz; all quadrons counts equally | ||
Ben developed pattern test for the CLASTRIG2, extra v1495 board was installed in clastrig2 and connected to the main v1495, test was started from Windows GUI and passed successfully; DVCSTRIG test to be conducted - VERY IMPORTANT ! also | Ben developed pattern test for the CLASTRIG2, extra v1495 board was installed in clastrig2 and connected to the main v1495, test was started from Windows GUI and passed successfully including loading by scripts; DVCSTRIG test to be conducted - VERY IMPORTANT ! also will look at polarity of the optput cables | ||
trigger downloading scripts were adjusted, downloading/uploading works fine, uploading LUT still not implemented | trigger downloading scripts were adjusted, downloading/uploading works fine, uploading LUT still not implemented | ||
L2 to be tested | L2 to be tested | ||
TO DO: DVCSTRIG test, gate cable, scope gate test, DAQ gate test, DVCS pedestal run; all-concidence-delay curve will be done with beam, need to write delays from script | |||
'makelut' will be installed into $CODA area, README file exist | |||
NEED TO COLLECT ALL DRAWINGS/DOCUMENTATIONS BEFORE RUN STARTS !!! | |||
Revision as of 09:28, 15 October 2008
present: Sergey Boyarinov, Valeri, Ben, Chris Cuevas, Penn, Sergey, Pawel
- DVCS-CLAS trigger
third rack was installed to make cabeling easy; all racks connected to the clean power, one more power strip was ordered to use second 20A circuit
cabling between splitters and discriminators has been started in according to the Ben's map
forward carreage is in position and DVCS-CLASTRIG cable was can to the nominal length, signal is in gate about 30ns from the beginning of the gate pulse, gate cables is in production, hope to get another 20ns; we will make gate-signal coincidence curve with DVCS laser with DAQ
EPICS readout for scalers in both CLASTRIG2 and DVCSTRIG is working, scaler histograms and corresponding MEDM GUIs to be checked; normally all scalers will be reported in Hz; all quadrons counts equally
Ben developed pattern test for the CLASTRIG2, extra v1495 board was installed in clastrig2 and connected to the main v1495, test was started from Windows GUI and passed successfully including loading by scripts; DVCSTRIG test to be conducted - VERY IMPORTANT ! also will look at polarity of the optput cables
trigger downloading scripts were adjusted, downloading/uploading works fine, uploading LUT still not implemented
L2 to be tested
TO DO: DVCSTRIG test, gate cable, scope gate test, DAQ gate test, DVCS pedestal run; all-concidence-delay curve will be done with beam, need to write delays from script
'makelut' will be installed into $CODA area, README file exist
NEED TO COLLECT ALL DRAWINGS/DOCUMENTATIONS BEFORE RUN STARTS !!!