|
|
| Line 1: |
Line 1: |
| ===
| |
|
| |
|
| '''Sergey Boyarinov's TODO list'''
| |
|
| |
| - PCAL stest setup (with Sergey P.)
| |
|
| |
| - get TIBCO license
| |
|
| |
| - equipment list with DB, lebles (with Sergey P.)
| |
|
| |
| - JLAB discriminators: ask Volker to push it
| |
|
| |
| - need 1881M ADCs, at least few modules
| |
|
| |
| - test sy527 which arrived from repair (with George Jacobs)
| |
|
| |
| - buy labels for both labeling machines
| |
|
| |
| - ET system debugging (with Carl)
| |
|
| |
| clonpc7:/etc> ifconfig -a
| |
| lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
| |
| inet 127.0.0.1 netmask 0xff000000
| |
| inet6 ::1 prefixlen 128
| |
| inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
| |
| gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
| |
| stf0: flags=0<> mtu 1280
| |
| en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
| |
| inet6 fe80::20d:93ff:fe65:ba7e%en0 prefixlen 64 scopeid 0x4
| |
| inet 129.57.68.7 netmask 0xffffff00 broadcast 129.57.68.255
| |
| inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
| |
| ether 00:0d:93:65:ba:7e
| |
| media: autoselect (100baseTX <full-duplex>) status: active
| |
| supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP
| |
| <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
| |
| en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
| |
| ether 00:11:24:a1:d0:47
| |
| media: autoselect (<unknown type>) status: inactive
| |
| supported media: autoselect
| |
| fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
| |
| lladdr 00:0d:93:ff:fe:65:ba:7e
| |
| media: autoselect <full-duplex> status: inactive
| |
| supported media: autoselect <full-duplex>
| |
|
| |
| ET system was confused:
| |
|
| |
| clonpc7:et> et_start -n 100 -s 10000 -f /tmp/test3
| |
| et_netinfo reached
| |
| et_netinfo: fully qualified default hostname >clonpc7.jlab.org<
| |
|
| |
| ifi->ifi_flags = 0xffff8049
| |
| LOOPBACK INTERFACE
| |
| INTERFACE IS UP
| |
| ifi->ifi_addr = 0x00300300
| |
| hptr = 0x00300190
| |
| addr_in->sin_addr = 127.0.0.1,
| |
|
| |
| ifi->ifi_flags = 0xffff8863
| |
| INTERFACE IS UP
| |
| ifi->ifi_addr = 0x00300350
| |
| hptr = 0x00300190
| |
| addr_in->sin_addr = 129.57.68.7,
| |
|
| |
| ifi->ifi_flags = 0xffff8863
| |
| INTERFACE IS UP
| |
| ifi->ifi_addr = 0x003003a0
| |
| hptr = 0x00000000
| |
| addr_in->sin_addr = 192.168.2.1,
| |
|
| |
| et_netinfo: address = 129.57.68.7
| |
| et_netinfo: error in gethostbyaddr
| |
| we've got 192.168.2.1, do not believe it is true
| |
| et_netinfo: address = 129.57.68.7
| |
| removing file >/tmp/test3<
| |
| file >/tmp/test3< removed
| |
| et_udpreceive: port=11111
| |
| et_udpreceive: port=11112
| |
| et_udpreceive: port=11112
| |
| et_udpreceive: port=11112
| |
| ET user library >/usr/local/clas/devel/coda/Darwin_powerpc/lib/libet_user.so< will be used
| |
|
| |
|
| |
| to eliminate alias ''192.168.2.1'' following command was used:
| |
|
| |
| ifconfig en0 -alias 192.168.2.1
| |
|
| |
| Now it looks better:
| |
|
| |
| clonpc7:/etc> et_start -n 100 -s 10000 -f /tmp/test3
| |
| et_netinfo reached
| |
| et_netinfo: fully qualified default hostname >clonpc7.jlab.org<
| |
|
| |
| ifi->ifi_flags = 0xffff8049
| |
| LOOPBACK INTERFACE
| |
| INTERFACE IS UP
| |
| ifi->ifi_addr = 0x00300300
| |
| hptr = 0x00300190
| |
| addr_in->sin_addr = 127.0.0.1,
| |
|
| |
| ifi->ifi_flags = 0xffff8863
| |
| INTERFACE IS UP
| |
| ifi->ifi_addr = 0x00300350
| |
| hptr = 0x00300190
| |
| addr_in->sin_addr = 129.57.68.7,
| |
|
| |
| et_netinfo: address = 129.57.68.7
| |
| removing file >/tmp/test3<
| |
| file >/tmp/test3< removed
| |
| et_udpreceive: port=11111
| |
| et_udpreceive: port=11112
| |
| ET user library >/usr/local/clas/devel/coda/Darwin_powerpc/lib/libet_user.so< will be used
| |
|
| |
|
| |
| - NTP servers on Solaris, update Solaris post-install page
| |
|
| |
| - replug AC power to emergency generators
| |
|
| |
| - learn, start and test auto-shutdown software on clons
| |
|
| |
| - on Nerses's request: install S99caRepeater and S99logServer scripts,
| |
| update corresponding procedure for Solaris (ask Paul Letta if necessary)
| |
|
| |
| - fix colors for clasrun accounts (and others ?) on clons
| |
|
| |
| - order 2 more discriminators for DVCSCAL
| |
|
| |
| - make paper 'DVCSCAL trigger system' and pass it to Chris and Ben
| |
|
| |
| '''Sergey Boyarinov's COMPLETED list'''
| |
|
| |
| ===
| |