Scratch

=

Sergey Boyarinov's TODO list

- PCAL stest setup (with Sergey P.)

- get TIBCO license

- equipment list with DB, lebles (with Sergey P.)

- JLAB discriminators: ask Volker to push it

- need 1881M ADCs, at least few modules

- test sy527 which arrived from repair (with George Jacobs)

- buy labels for both labeling machines

- ET system debugging (with Carl)

clonpc7:/etc> ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
       inet 127.0.0.1 netmask 0xff000000 
       inet6 ::1 prefixlen 128 
       inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
       inet6 fe80::20d:93ff:fe65:ba7e%en0 prefixlen 64 scopeid 0x4 
       inet 129.57.68.7 netmask 0xffffff00 broadcast 129.57.68.255
       inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
       ether 00:0d:93:65:ba:7e 
       media: autoselect (100baseTX <full-duplex>) status: active
       supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP 
   <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
       ether 00:11:24:a1:d0:47 
       media: autoselect (<unknown type>) status: inactive
       supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
       lladdr 00:0d:93:ff:fe:65:ba:7e 
       media: autoselect <full-duplex> status: inactive
       supported media: autoselect <full-duplex>

ET system was confused:

clonpc7:et> et_start -n 100 -s 10000 -f /tmp/test3
et_netinfo reached
et_netinfo: fully qualified default hostname >clonpc7.jlab.org<

ifi->ifi_flags = 0xffff8049
LOOPBACK INTERFACE
INTERFACE IS UP
ifi->ifi_addr = 0x00300300
hptr = 0x00300190
addr_in->sin_addr = 127.0.0.1,

ifi->ifi_flags = 0xffff8863
INTERFACE IS UP
ifi->ifi_addr = 0x00300350
hptr = 0x00300190
addr_in->sin_addr = 129.57.68.7,

ifi->ifi_flags = 0xffff8863
INTERFACE IS UP
ifi->ifi_addr = 0x003003a0
hptr = 0x00000000
addr_in->sin_addr = 192.168.2.1,

et_netinfo: address = 129.57.68.7
et_netinfo: error in gethostbyaddr
we've got 192.168.2.1, do not believe it is true
et_netinfo: address = 129.57.68.7
removing file >/tmp/test3<
file >/tmp/test3< removed
et_udpreceive: port=11111
et_udpreceive: port=11112
et_udpreceive: port=11112
et_udpreceive: port=11112
ET user library >/usr/local/clas/devel/coda/Darwin_powerpc/lib/libet_user.so< will be used

to eliminate alias 192.168.2.1 following command was used:

ifconfig en0 -alias 192.168.2.1

Now it looks better:

clonpc7:/etc> et_start -n 100 -s 10000 -f /tmp/test3
et_netinfo reached
et_netinfo: fully qualified default hostname >clonpc7.jlab.org<

ifi->ifi_flags = 0xffff8049
LOOPBACK INTERFACE
INTERFACE IS UP
ifi->ifi_addr = 0x00300300
hptr = 0x00300190
addr_in->sin_addr = 127.0.0.1,

ifi->ifi_flags = 0xffff8863
INTERFACE IS UP
ifi->ifi_addr = 0x00300350
hptr = 0x00300190
addr_in->sin_addr = 129.57.68.7,

et_netinfo: address = 129.57.68.7
removing file >/tmp/test3<
file >/tmp/test3< removed
et_udpreceive: port=11111
et_udpreceive: port=11112
ET user library >/usr/local/clas/devel/coda/Darwin_powerpc/lib/libet_user.so< will be used

- NTP servers on Solaris, update Solaris post-install page

- replug AC power to emergency generators

- learn, start and test auto-shutdown software on clons

- on Nerses's request: install S99caRepeater and S99logServer scripts, update corresponding procedure for Solaris (ask Paul Letta if necessary)

- fix colors for clasrun accounts (and others ?) on clons

- order 2 more discriminators for DVCSCAL

- make paper 'DVCSCAL trigger system' and pass it to Chris and Ben

Sergey Boyarinov's COMPLETED list