CycladesTS1000

Lunux-based Terminal Server, located in Counting Root. Manufacturer's info can be found on Cyclades web site.

Cyclades-TS Documentation: Cyclades-TS QuickStart Guide Cyclades-TS User Guide

To connect from console: connect PC to 'console' input and power up.

 login: root ??????
 pass: tslinux ????

---++ *Cyclades-TS 1000*

  * 16 port console/terminal server
  * IP name: hallb-ts1.
  * dafault password for super user(root): tslinux (actual is the same as for clons)
  * port numbering: ttyS1-ttyS16 
  * Escape sequence to disconnect is "~."

---++ Port Map

 | *Port#* | *Port name* | *Servername* | *Comment*
 |  1      |   ttyS1     |    bi8k      |  BigIron 8000 switch/router
 |  2      |   ttyS2     |    clon10    |  SUN E3500 server
 |  3      |   ttyS3     |    clon00n   |  SUN E3500 server
 |  4      |   ttyS4     |    clonfs    |  off-line
 |  5      |   ttyS5     |    clonfs2   |  Netapp F87 filer
 |  6      |   ttyS6     |    bethsw3   |  Cisco Gigabit switch
 |  7      |   ttyS7     |    clas-sc0  |  PC lunux
 |  8      |   ttyS8     |    clonpc3   |  Linux PC server
 |  9      |   ttyS9     |    db5       |  Ingress DB server (HPUX)
 |  10     |   ttyS10    |              |
 |  11     |   ttyS11    |              |
 |  12     |   ttyS12    |    clon00    |  V240
 |  13     |   ttyS13    |              |
 |  14     |   ttyS14    |              |
 |  15     |   ttyS15    |              |
 |  16     |   ttyS16    |              |

---++ Wire map:

• RJ45-RJ45->CUS9899(Red)->DB9(f)*

 1 (O)   --> 1        
 2 (wO)  --> 2      
 3 (G)   --> 5 --------> 2 
 4 (wBl) --> 6      
 5 (Bl)  --> 3 --------> 5 
 6 (wG)  --> 4 --------> 3 
 7 (Br)  --> 7      
 8 (wBr) --> 8      

• RJ45-RJ45->CUS9898(Blue)->DB9(f)*

 1 (O)   --> 1        
 2 (wO)  --> 2      
 3 (G)   --> 4 --------> 2 
 4 (wG)  --> 6      
 5 (Bl)  --> 3 --------> 5 
 6 (wBl) --> 5 --------> 3 
 7 (Br)  --> 7      
 8 (wBr) --> 8