UPS (Uninterruptible Power Supplies): Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
CLON cluster equipped with two big UPSes from APC Corporation. | CLON cluster equipped with two big SYMMETRA RX6000 Single-phase UPSes from APC Corporation. | ||
These UPSes are multi-battery systems. | These UPSes are multi-battery systems. | ||
In case of something wrong with UPSes follow the instruction of | In case of something wrong with UPSes follow the instruction of | ||
| Line 13: | Line 13: | ||
web link to http://UPS_CHB2/ (device/apc) | web link to http://UPS_CHB2/ (device/apc) | ||
'''SYMMETRA RX6000 firmware upgrade''' | |||
Enable SYMMETRA FTP service using its web interface. Download appropriate firmware from APC web site (last time ''apc_hw02_aos334_sy331.exe'' was used). Place it into CUE home directory, run ''metaframe'' and click on firmware file. Several files will be installed, upgrade program will be started and text GUI will shows up. Type SYMMETRA IP and admin username/password, start firmware installation and wait several minutes for complition. Repeat for all SYMMETRA devices (currently we have 2 of them). Remove all installed files from CUE home directory. | |||
Revision as of 14:56, 14 February 2007
CLON cluster equipped with two big SYMMETRA RX6000 Single-phase UPSes from APC Corporation. These UPSes are multi-battery systems. In case of something wrong with UPSes follow the instruction of UPS Troubleshooting.
Smaller UPSes ...
All UPSes are connected to emergency generator.
All connections (ether via Web interface or SSH) allowed only from local subnet.
web link to http://UPS_CHB1/ (device/apc)
web link to http://UPS_CHB2/ (device/apc)
SYMMETRA RX6000 firmware upgrade
Enable SYMMETRA FTP service using its web interface. Download appropriate firmware from APC web site (last time apc_hw02_aos334_sy331.exe was used). Place it into CUE home directory, run metaframe and click on firmware file. Several files will be installed, upgrade program will be started and text GUI will shows up. Type SYMMETRA IP and admin username/password, start firmware installation and wait several minutes for complition. Repeat for all SYMMETRA devices (currently we have 2 of them). Remove all installed files from CUE home directory.