Abaco XVB603: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
In BIOS, go to '''Abaco->Network Boot Configuration''' and enable '''PXE ROM - ETH3''' and '''PXE ROM - ETH4'''. | In BIOS, go to '''Abaco->Network Boot Configuration''' and enable '''PXE ROM - ETH3''' and '''PXE ROM - ETH4'''. | ||
Save | '''Save & Exit''' | ||
Recycle power, it should be ready for PXE boot. If not, in BIOS, go to '''Boot''' and set appropriate network port(s) in BOOT Option #1 (and #2), disable others. | |||
Revision as of 14:13, 2 June 2025
Initial setting:
In BIOS, go to Advanced->Network Stack Configuration and enable Network Stack and Ipv4 PXE Support.
In BIOS, go to Abaco->VMEbus Configuration and set Reserve VME Space to 512 MBytes.
In BIOS, go to Abaco->Network Boot Configuration and enable PXE ROM - ETH3 and PXE ROM - ETH4.
Save & Exit
Recycle power, it should be ready for PXE boot. If not, in BIOS, go to Boot and set appropriate network port(s) in BOOT Option #1 (and #2), disable others.