Akcp: Difference between revisions

Revision as of 11:10, 9 June 2011

AKCP is ethernet-based devices to monotor temperature, humidity etc. Web site is http://www.akcp.com.

Initial settings:

Device comes with default IP address 192.168.0.100. To change it, do following (example for the MAC OS X):

connect it to laptop ethernet port
in system preferences->network set Configure IPv4: Manually, IP Address: 192.168.0.1
open web browser and goto http://192.168.0.100/
login as Administrator, pass public
click Network and set desired values for IP
click Save
choose US Eastern Time, set current time manually, choose Once an hour, set NTP servers ntp1.jlab.org and ntp2.jlab.org
click Save

From now on all settings can be done over the web from any computer (inside firewall of course)

Time settings:

Revision as of 11:10, 9 June 2011 view source 129.57.76.91 (talk) No edit summary ← Older edit		Revision as of 11:10, 9 June 2011 view source 129.57.76.91 (talk) No edit summary Newer edit →
Line 1:		Line 1:
	'''AKCP''' is ethernet-based devices to monotor temperature, humidity etc. Web site is http://www.akcp.com.		'''AKCP''' is ethernet-based devices to monotor temperature, humidity etc. Web site is http://www.akcp.com.

	Documentation: [https://clonwiki.jlab.org/wiki/clondocs/Docs/sp2sp8ma.pdf.pdf (Manual(pdf)] [https://clonwiki.jlab.org/wiki/clondocs/Docs/iodman.pdf.pdf (MIBs(pdf)]		Documentation: [https://clonwiki.jlab.org/wiki/clondocs/Docs/sp2sp8ma.pdf.pdf Manual(pdf)] [https://clonwiki.jlab.org/wiki/clondocs/Docs/iodman.pdf.pdf MIBs(pdf)]