Akcp: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
* open web browser and goto http://192.168.0.100/ | * open web browser and goto http://192.168.0.100/ | ||
* login as ''Administrator'', pass ''public'' | * login as ''Administrator'', pass ''public'' | ||
* click '''Network''' and set desired values | * click '''Network''' and set desired values for IP, as well as ''US Eastern Time'', NTP servers ''ntp1.jlab.org'' and ''ntp2.jlab.org'' | ||
* click '''Save''' | * click '''Save''' | ||
From now on all settings can be done over the web from any computer (inside firewall of course) | From now on all settings can be done over the web from any computer (inside firewall of course) | ||
Time settings: | |||
* | |||
Revision as of 10:23, 9 June 2011
AKCP is ethernet-based devices to monotor temperature, humidity etc. Web site is http://www.akcp.com.
Documentation:
Initial settings:
Device comes with default IP address 192.168.0.100. To change it, do following (example for the MAC OS X):
- connect it to laptop ethernet port
- in system preferences->network set Configure IPv4: Manually, IP Address: 192.168.0.1, Subnet Mask: 255.255.255.0
- open web browser and goto http://192.168.0.100/
- login as Administrator, pass public
- click Network and set desired values for IP, as well as US Eastern Time, NTP servers ntp1.jlab.org and ntp2.jlab.org
- click Save
From now on all settings can be done over the web from any computer (inside firewall of course)
Time settings: