Clondaq2

Clondaq2 is X4200 server running Solaris, s/n: 0626AM2523, f/n: F46985. It is second DAQ server serving mostly to run Event Recorder and handle SILO traffic.

Network ports:

clondaq2      - e1000g0
clondaq2-daq1 - ixgb0 (10GBit; was e1000g1 while 1GBit)
clondaq2-daq2 - e1000g2

After Solaris installation:

1. Create /ssa directory and make following links there:

cd /ssa
ln -s /mnt/raid0 active
ln -s /mnt/raid1 epmty
ln -s /mnt/raid2 postsilo1
ln -s /mnt/raid3 postsilo2

2. Create two files in /ssa directory:

/ssa/ENVIRONMENT contains:

set PARTITIONS = " raid0 raid1 raid2 raid3 "
set LOGFILE = "ssa/logfile"

/ssa/STUB.TARGET contains:

/mss/clas/dvcs2/data

(or whatever run period you are in)

3. Make /raid/stage_in link:

cd /
ln -s /ssa/active raid

4. Make /mss link:

cd /
ln -s /w/mss mss

5. Adjust Sudo config file.

6. Make sure ZFS RAID partitions are mounted.

7. Routing must be adjusted to make sure input and output traffics are taking different routes.