TO DO Lists: Difference between revisions

From CLONWiki
Jump to navigation Jump to search
Boiarino (talk | contribs)
No edit summary
Boiarino (talk | contribs)
No edit summary
Line 117: Line 117:
  et_udpreceive: port=11112
  et_udpreceive: port=11112
  ET user library >/usr/local/clas/devel/coda/Darwin_powerpc/lib/libet_user.so< will be used
  ET user library >/usr/local/clas/devel/coda/Darwin_powerpc/lib/libet_user.so< will be used
- NTP servers on Solaris, update Solaris post-install page (and Linux on clon04)


- learn, start and test auto-shutdown software on clons
- learn, start and test auto-shutdown software on clons
Line 141: Line 138:


  17-sep-2007: done
  17-sep-2007: done
- NTP servers on Solaris, update Solaris post-install page (and Linux on clon04)
24-sep-2007: done


===
===

Revision as of 14:06, 24 September 2007

=

Sergey Boyarinov's TODO list

- PCAL test setup (with Sergey P.)

14-sep-2007 everything seems working, except missing delay cables and wierd
problem: FASTBUS hung on first event

- get TIBCO license:

17-sep-2007 requisition 266520 has been submitted

- equipment list with DB, lebles (with Sergey P.)

- JLAB discriminators: ask Volker to push it

- need 1881M ADCs, at least few modules

- test sy527 which arrived from repair (with George Jacobs)

- buy labels for both labeling machines

17-sep-2007 requisitions 266507 and 266519 have been submitted

- ET system debugging (with Carl)

clonpc7:/etc> ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
       inet 127.0.0.1 netmask 0xff000000 
       inet6 ::1 prefixlen 128 
       inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
       inet6 fe80::20d:93ff:fe65:ba7e%en0 prefixlen 64 scopeid 0x4 
       inet 129.57.68.7 netmask 0xffffff00 broadcast 129.57.68.255
       inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
       ether 00:0d:93:65:ba:7e 
       media: autoselect (100baseTX <full-duplex>) status: active
       supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP 
   <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
       ether 00:11:24:a1:d0:47 
       media: autoselect (<unknown type>) status: inactive
       supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
       lladdr 00:0d:93:ff:fe:65:ba:7e 
       media: autoselect <full-duplex> status: inactive
       supported media: autoselect <full-duplex>

ET system was confused:

clonpc7:et> et_start -n 100 -s 10000 -f /tmp/test3
et_netinfo reached
et_netinfo: fully qualified default hostname >clonpc7.jlab.org<
ifi->ifi_flags = 0xffff8049
LOOPBACK INTERFACE
INTERFACE IS UP
ifi->ifi_addr = 0x00300300
hptr = 0x00300190
addr_in->sin_addr = 127.0.0.1,
ifi->ifi_flags = 0xffff8863
INTERFACE IS UP
ifi->ifi_addr = 0x00300350
hptr = 0x00300190
addr_in->sin_addr = 129.57.68.7,
ifi->ifi_flags = 0xffff8863
INTERFACE IS UP
ifi->ifi_addr = 0x003003a0
hptr = 0x00000000
addr_in->sin_addr = 192.168.2.1,
et_netinfo: address = 129.57.68.7
et_netinfo: error in gethostbyaddr
we've got 192.168.2.1, do not believe it is true
et_netinfo: address = 129.57.68.7
removing file >/tmp/test3<
file >/tmp/test3< removed
et_udpreceive: port=11111
et_udpreceive: port=11112
et_udpreceive: port=11112
et_udpreceive: port=11112
ET user library >/usr/local/clas/devel/coda/Darwin_powerpc/lib/libet_user.so< will be used


to eliminate alias 192.168.2.1 following command was used:

ifconfig en0 -alias 192.168.2.1

Now it looks better:

clonpc7:/etc> et_start -n 100 -s 10000 -f /tmp/test3
et_netinfo reached
et_netinfo: fully qualified default hostname >clonpc7.jlab.org<
ifi->ifi_flags = 0xffff8049
LOOPBACK INTERFACE
INTERFACE IS UP
ifi->ifi_addr = 0x00300300
hptr = 0x00300190
addr_in->sin_addr = 127.0.0.1,
ifi->ifi_flags = 0xffff8863
INTERFACE IS UP
ifi->ifi_addr = 0x00300350
hptr = 0x00300190
addr_in->sin_addr = 129.57.68.7,
et_netinfo: address = 129.57.68.7
removing file >/tmp/test3<
file >/tmp/test3< removed
et_udpreceive: port=11111
et_udpreceive: port=11112
ET user library >/usr/local/clas/devel/coda/Darwin_powerpc/lib/libet_user.so< will be used

- learn, start and test auto-shutdown software on clons

- on Nerses's request: install S99caRepeater and S99logServer scripts, update corresponding procedure for Solaris (ask Paul Letta if necessary)

14-sep-2007: installed, but actial reboot was not tested

- fix colors for clasrun accounts (and others ?) on clons

- order 2 more discriminators for DVCSCAL

- make paper 'DVCSCAL trigger system' and pass it to Chris and Ben

- reply to Motorola about prpmc880

Sergey Boyarinov's COMPLETED list

- replug AC power to emergency generators

17-sep-2007: done

- NTP servers on Solaris, update Solaris post-install page (and Linux on clon04)

24-sep-2007: done

=