Abaco XVB603: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
'''Save & Exit''' | '''Save & Exit''' | ||
Connect ethernet cable to the top port. Recycle power, it should boot (if not, in BIOS, go to '''Boot''' and set appropriate network port(s) in BOOT Option #1 (and #2) | Connect ethernet cable to the top port. Recycle power, it should boot (if not, in BIOS, go to '''Boot''' and set appropriate network port(s) in BOOT Option #1 (and #2)). | ||
Latest revision as of 16:30, 2 June 2025
Initial setting:
Unplug ethernet cable.
In BIOS, go to Advanced->Network Stack Configuration and enable Network Stack and Ipv4 PXE Support.
In BIOS, go to Abaco->Network Boot Configuration and enable PXE ROM - ETH3 and PXE ROM - ETH4.
In BIOS, go to Abaco->VMEbus Configuration and set Reserve VME Space to 512 MBytes.
Save & Exit
Connect ethernet cable to the top port. Recycle power, it should boot (if not, in BIOS, go to Boot and set appropriate network port(s) in BOOT Option #1 (and #2)).