JLAB TS2: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m Text replacement - "clonwiki.jlab.org" to "clonwiki0.jlab.org" |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
Manual for old TS in [https:// | Manual for old TS in [https://clonwiki0.jlab.org/wiki/clondocs/man/VXI/JLAB_TS.ps (ps)] | ||
Manual for old TS in [https:// | Manual for old TS in [https://clonwiki0.jlab.org/wiki/clondocs/man/VXI/JLAB_TS.pdf (pdf)] | ||
Manual for new TS2 in [https:// | Manual for new TS2 in [https://clonwiki0.jlab.org/wiki/clondocs/Docs/JLAB_VME_ts2_board.doc (doc)] | ||
Manual for new TS2 in [https:// | Manual for new TS2 in [https://clonwiki0.jlab.org/wiki/clondocs/Docs/JLAB_VME_ts2_board.pdf (pdf)] | ||
| Line 15: | Line 15: | ||
* Enter (16-bit hex) interface address ('0' to quit) - 0ed0 | * Enter (16-bit hex) interface address ('0' to quit) - 0ed0 | ||
2. On TS2, run ''ts2_link'': | 2. On SFI ROC, run ''sfi_link'' | ||
3. On TS2, run ''ts2_link'': | |||
* Enable FAST L1 mode? (1 = yes, 0 = no) - 0 | * Enable FAST L1 mode? (1 = yes, 0 = no) - 0 | ||
* Enter ROC buffer mode (1 = buffer, 0 = lock) - 0 | * Enter ROC buffer mode (1 = buffer, 0 = lock) - 0 | ||
* Enter (hex) ROC enable pattern ('0' to quit) - xxxxxxx ( | * Enter (hex) ROC enable pattern ('0' to quit) - xxxxxxx (roc_mask) | ||
* type 'g' and <enter> | * type 'g' and <enter> | ||
4. When done, type 'q' and <enter> on both | |||
'''NOTE''': group of crates can be tested together, in that case vme_link/sfi_link must be started on each of them, and roc_mask for ts2_link must be set accordingly | |||
Latest revision as of 15:06, 17 April 2015
Manual for old TS in (ps)
Manual for old TS in (pdf)
Manual for new TS2 in (doc)
Manual for new TS2 in (pdf)
Branches testing procedure
1. On VME ROC, run vme_link:
- Enter (16-bit hex) interface address ('0' to quit) - 0ed0
2. On SFI ROC, run sfi_link
3. On TS2, run ts2_link:
- Enable FAST L1 mode? (1 = yes, 0 = no) - 0
- Enter ROC buffer mode (1 = buffer, 0 = lock) - 0
- Enter (hex) ROC enable pattern ('0' to quit) - xxxxxxx (roc_mask)
- type 'g' and <enter>
4. When done, type 'q' and <enter> on both
NOTE: group of crates can be tested together, in that case vme_link/sfi_link must be started on each of them, and roc_mask for ts2_link must be set accordingly