Clondaq1: Difference between revisions

From CLONWiki
Jump to navigation Jump to search
← Older edit
Boiarino (talk | contribs)
jpeople, Administrators
4,497 edits
No edit summary
Boiarino (talk | contribs)
jpeople, Administrators
4,497 edits
 
(11 intermediate revisions by 3 users not shown)
Line 1: Line 1:
CURRENTLY clonxt1 !!!


Event builder server (EB only)
== ASUS server ==


SUN Fire V40z, 4x1.8GHz i86, 8GB RAM


---+ CLONXT1 (QUAD Opteron Sun Fire V40z)
Info on labels:
This server is being used as *DAQ Event Builder*
 
  * [[http://www.sun.com/servers/entry/v40z/specs.jsp][Specifications]]
ASUS server ESC4000A-E12 / 9754 2.25G / 768GB
  * [[http://sunsolve.sun.com/handbook_pub/Systems/SunFireV40z/SunFireV40z.html][System Hand Book]]
SO: 6003231
  * BaseConfigXt1: Basic Configuration
PO: 23-P1487
S/N (?): R4S0MD0003S8
 
'''NOTE''': not every monitor works with it during installation, example of compatible one is DELL U2311Hb (and select VGA/analog input explicitly)
 
'''NOTE''': server has 2 disks, but I did not find in BIOS how to make raid on BIOS level, so RIAD1 should be configured during RHEL9 installation during disks partitioning.
 
== old server ==


HowTo:
Serial 'ser mgr' port login: root/changeme


---+ How To
This server is being used as *DAQ Event Builder*
SUN Fire V40z, 4x1.8GHz i86, 8GB RAM, s/n: XG043571186, f/n: F418263.


  * pkg_get: install new package from Solaris Free Software
[[http://www.sun.com/servers/entry/v40z/specs.jsp Specifications]]
  * compilers: Sun Studio 9 (/opt/SUNWspro)
[[http://sunsolve.sun.com/handbook_pub/Systems/SunFireV40z/SunFireV40z.html System Hand Book]]


---+ RAID disks:
Network ports:
  * Partitioning:
<pre>
fdisk /dev/rdsk/c2t40d{0123}p0
format /dev/rdsk/c2t40d{0123}p0
label
auto


Create Filesystem:
clondaq1      - e1000g0
newfs /dev/rdsk/c2t40d0s6
clondaq1-daq1 - ixgb0 (10GBit; was bge0 while 1GBit)
</pre>
  clondaq1-daq2 - e1000g1
   
  * Devices: /dev/rdsk/c2t40d{0123}s6

Latest revision as of 15:57, 11 December 2025

ASUS server

Info on labels: 

ASUS server ESC4000A-E12 / 9754 2.25G / 768GB
SO: 6003231
PO: 23-P1487
S/N (?): R4S0MD0003S8

NOTE: not every monitor works with it during installation, example of compatible one is DELL U2311Hb (and select VGA/analog input explicitly)

NOTE: server has 2 disks, but I did not find in BIOS how to make raid on BIOS level, so RIAD1 should be configured during RHEL9 installation during disks partitioning.

old server

Serial 'ser mgr' port login: root/changeme

This server is being used as *DAQ Event Builder* SUN Fire V40z, 4x1.8GHz i86, 8GB RAM, s/n: XG043571186, f/n: F418263. 

[Specifications]
[System Hand Book]

Network ports: 

clondaq1      - e1000g0
clondaq1-daq1 - ixgb0 (10GBit; was bge0 while 1GBit)
clondaq1-daq2 - e1000g1
Retrieved from "https://clonwiki0.jlab.org/wiki/index.php?title=Clondaq1&oldid=8436"