March 12, 2008 online meeting minutes: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 9: | Line 9: | ||
* about 50 scalers, 2 reads by 16bit, every 10 seconds (latch is coping to output regs | * about 50 scalers, 2 reads by 16bit, every 10 seconds (latch is coping to output regs | ||
* no event-by-event read, or need input | * no event-by-event read, or need input pattern fifo ? or at least single sector pattern .. will discuss | ||
* control: gui on clonwin2, vxworks server; gui will save to file to be used during run | * control: gui on clonwin2, vxworks server; gui will save to file to be used during run | ||
| Line 20: | Line 20: | ||
* testing: self-test in Ben's office; cosmic etc tests to be planned | * testing: self-test in Ben's office; cosmic etc tests to be planned | ||
* make sure level2 works with new electronics; single sector outputs from FPGA ? use L2 latch ? (it will be served as sector-based pattern as well ..) | |||
* pulser events and level2 ??????? want l2pass in that case ... | |||
* 2 test cables for Ben (68-68) | |||
* add EC to trigger ? extra 2 inputs per sector (inner and total from one discriminator, outer never used); will discuss again after L2 situation decided, | |||
may do not need 1-6 outputs as sector-based | |||
* install everything in the hall, start installation today; Valery and Raffaella will think about test plan using cosmic/pulser | |||
2. G12 run: EPICS information in data stream, Raffaella will check it | |||
some fixes in DAQ (Sergey) | |||
EPICS expert ??? | |||
3. INFN will by TPC electronics | |||
Latest revision as of 10:16, 12 March 2008
present: Sergey Boyarinov, Ben Raydo, Sergey Pozdnyakov, Raffaella Devita, Valeri Kubarovski
1. G12 trigger
- do not destroy existing trigger
- new VME crate on top of trigger rack, all OR modules there, VME repeater
- about 50 scalers, 2 reads by 16bit, every 10 seconds (latch is coping to output regs
- no event-by-event read, or need input pattern fifo ? or at least single sector pattern .. will discuss
- control: gui on clonwin2, vxworks server; gui will save to file to be used during run
- Ben's setup will stay
- ECL output cards to be here soon
- install CC and GUI on clonwin2
- testing: self-test in Ben's office; cosmic etc tests to be planned
- make sure level2 works with new electronics; single sector outputs from FPGA ? use L2 latch ? (it will be served as sector-based pattern as well ..)
- pulser events and level2 ??????? want l2pass in that case ...
- 2 test cables for Ben (68-68)
- add EC to trigger ? extra 2 inputs per sector (inner and total from one discriminator, outer never used); will discuss again after L2 situation decided,
may do not need 1-6 outputs as sector-based
- install everything in the hall, start installation today; Valery and Raffaella will think about test plan using cosmic/pulser
2. G12 run: EPICS information in data stream, Raffaella will check it
some fixes in DAQ (Sergey)
EPICS expert ???
3. INFN will by TPC electronics