|
|
| (3 intermediate revisions by the same user not shown) |
| Line 8: |
Line 8: |
| gmake install | | gmake install |
|
| |
|
| Create (or copy existing) file ''/etc/bootptab''. Following example contains boot information for EtherLite terminal servers: | | Create (or copy existing) file ''/etc/bootptab'' (see EtherLite-related example in [[EtherLite32]]). |
| # @(#) $Header: /users/hpnp/odyssey/repository/examples/bootptab,v 1.2 1997/06/26 21:23:33 hpnp Exp $
| | |
| # Example /etc/bootptab: database for bootp server (/etc/bootpd). | | Modify ''/etc/inetd.conf'' file adding following line: |
| # Blank lines and lines beginning with '#' are ignored.
| | bootps dgram udp wait root /usr/sbin/bootpd bootpd |
| #
| | |
| # Legend:
| | Run ''inetconv'' to produce ''/var/svc/manifest/network/bootps-udp.xml'' file. |
| #
| | |
| # first field -- hostname
| | Start 'bootpd' service: |
| # (may be full domain name)
| | clon10:network> svcadm enable network/bootps/udp |
| #
| | clon10:network> svcs | grep bootp |
| # hd -- home directory
| | online 11:29:27 svc:/network/bootps/udp:default |
| # bf -- bootfile
| |
| # cs -- cookie servers
| |
| # ds -- domain name servers
| |
| # gw -- gateways
| |
| # ha -- hardware address
| |
| # ht -- hardware type
| |
| # im -- impress servers
| |
| # ip -- host IP address
| |
| # lg -- log servers
| |
| # lp -- LPR servers
| |
| # ns -- IEN-116 name servers
| |
| # rl -- resource location protocol servers
| |
| # sm -- subnet mask
| |
| # tc -- template host (points to similar host entry)
| |
| # to -- time offset (seconds)
| |
| # ts -- time servers
| |
| #
| |
| # Be careful about including backslashes where they're needed. Weird (bad)
| |
| # things can happen when a backslash is omitted where one is intended.
| |
| #
| |
| #peripheral1:\
| |
| # :hn:ht=ether:vm=rfc1048:\
| |
| # :ha=08000903212F:\
| |
| # :ip=190.40.101.22:\
| |
| # :sm=255.255.255.0:\
| |
| # :gw=190.40.101.1:\
| |
| # :lg=190.40.101.3:\
| |
| # :T144="hpnp/peripheral1.cfg":
| |
| ########## Etherlite 32 RS232, Forward Carriage 1st Level, etherlite1
| |
| els0:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e7008569:ip=129.57.167.208:
| |
| ### bf=el32_realport.bin:
| |
| ########## Etherlite 2 RS422 (EIA422), Forward Carriage 2nd Level, rs422a (reset1)
| |
| els1:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e721288b:ip=129.57.167.215:
| |
| ### bf=el2_realport.bin:
| |
| ########## Etherlite 32 RS232, Space Frame 1st Level South, etherlite2
| |
| els2:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e7213b9f:ip=129.57.167.209:
| |
| ### bf=el32_realport.bin:
| |
| ########## Etherlite 2 RS422 (EIA422), South Claim Shelf, rs422b (reset3)
| |
| els3:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e72141bd:ip=129.57.167.216:
| |
| ### bf=el2_realport.bin:
| |
| ########## Etherlite 2 RS422 (EIA422), Space Frame 1st Level South, rs422c (reset5)
| |
| els4:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e72141b9:ip=129.57.167.217:
| |
| ### bf=el2_realport.bin:
| |
| ########## Etherlite 2 RS422 (EIA422), Space Frame 1st Level North, rs422d (reset2)
| |
| els5:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e72141ae:ip=129.57.167.218:
| |
| ### bf=el2_realport.bin:
| |
| ########## Etherlite 2 RS422 (EIA422), Space Frame 2nd Level North (behind dc11), rs422e (reset4)
| |
| els6:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e72141c4:ip=129.57.167.219:
| |
| ### bf=el2_realport.bin:
| |
| ########## Etherlite 2 RS422 (EIA422), Hall B Gas Shed, rs422f (reset6)
| |
| els7:sm=255.255.255.0:gw=129.57.160.1:ht=ether:ha=00a0e72141b1:ip=129.57.160.20:
| |
| ### bf=el2_realport.bin:
| |
| ########## Etherlite 32 RS232, Space Frame 1st Level North, etherlite3
| |
| els8:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e7214019:ip=129.57.167.210:
| |
| ### bf=el32_realport.bin:
| |
| ########## Etherlite 32 RS232, South Claim Shellf, etherlite4
| |
| els9:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e7214003:ip=129.57.167.211:
| |
| ### bf=el32_realport.bin:
| |
| ########## Etherlite 2 RS232, Hall B Gas Shed (2-port !), etherlite8 (clasgas)
| |
| elsa:sm=255.255.255.0:gw=129.57.160.1:ht=ether:ha=00a0e7214e24:ip=129.57.160.50:
| |
| ### bf=el2_realport.bin:
| |
| ########## Etherlite 32 RS232, Counting Room, etherlite9
| |
| elsb:sm=255.255.255.0:gw=129.57.68.100:ht=ethernet:ha=00a0e72331b2:ip=129.57.68.95:
| |
| ### bf=el32_realport.bin: | |
| ########## Etherlite 32 RS232, Forward Carriage 1st Level, etherlite5 | |
| elsc:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e721402e:ip=129.57.167.212:
| |
| ### bf=el32_realport.bin:
| |
| ########## Etherlite 32 RS232, Pie Tower, etherlite10
| |
| elsd:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e721401a:ip=129.57.167.220: | |
| ### bf=el32_realport.bin:
| |
| ########## Etherlite 32 RS232, Forward Carriage, 2nd Level, etherlite11
| |
| else:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e723764c:ip=129.57.167.228:
| |
| ### bf=el32_realport.bin:
| |
| ########## Etherlite 32 RS232, ... , etherlite12
| |
| elsf:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e7237a08:ip=129.57.167.229:
| |
| ### bf=el32_realport.bin:
| |
| ########## Etherlite 32 RS232, ... , etherlite13
| |
| elsg:sm=255.255.255.0:gw=129.57.167.99:ht=ether:ha=00a0e7237a8f:ip=129.57.167.204:
| |
| ### bf=el32_realport.bin:
| |
| #
| |
We are using old BOOTP version 2.4, until better way will be found. Some changes were applied and result was tared and stored in /usr/local/downloads directory. Following procedure shell be used:
cd /usr/local/src
cp ../downloads/bootpd-2.4.tar .
tar xvf bootpd-2.4.tar
rm bootpd-2.4.tar
cd bootpd-2.4
gmake sunos5
gmake install
Create (or copy existing) file /etc/bootptab (see EtherLite-related example in EtherLite32).
Modify /etc/inetd.conf file adding following line:
bootps dgram udp wait root /usr/sbin/bootpd bootpd
Run inetconv to produce /var/svc/manifest/network/bootps-udp.xml file.
Start 'bootpd' service:
clon10:network> svcadm enable network/bootps/udp
clon10:network> svcs | grep bootp
online 11:29:27 svc:/network/bootps/udp:default