UPS (Uninterruptible Power Supplies) - Revision history

Boiarino: Text replacement - "clonwiki.jlab.org" to "clonwiki0.jlab.org"

2015-04-17T20:10:26Z

Text replacement - "clonwiki.jlab.org" to "clonwiki0.jlab.org"

← Older revision		Revision as of 16:10, 17 April 2015
Line 1:		Line 1:
	CLON cluster equipped with two big SYMMETRA RM 6000 Single-phase UPSes from APC Corporation. These UPSes are multi-battery systems.		CLON cluster equipped with two big SYMMETRA RM 6000 Single-phase UPSes from APC Corporation. These UPSes are multi-battery systems.

	Documentation: [https://~~clonwiki~~.jlab.org/wiki/clondocs/Docs/ASTE-6Z6K6C_R0_EN.pdf Installation Manual (pdf)]		Documentation: [https://clonwiki0.jlab.org/wiki/clondocs/Docs/ASTE-6Z6K6C_R0_EN.pdf Installation Manual (pdf)]

	In case of something wrong with UPSes follow the instruction of [[UPS Troubleshooting]].		In case of something wrong with UPSes follow the instruction of [[UPS Troubleshooting]].

129.57.76.91 at 16:28, 27 November 2012

2012-11-27T16:28:31Z

← Older revision		Revision as of 12:28, 27 November 2012
Line 1:		Line 1:
	CLON cluster equipped with two big SYMMETRA RM 6000 Single-phase UPSes from APC Corporation. These UPSes are multi-battery systems.		CLON cluster equipped with two big SYMMETRA RM 6000 Single-phase UPSes from APC Corporation. These UPSes are multi-battery systems.

	Documentation: [https://clonwiki.jlab.org/wiki/clondocs/Docs/ASTE-6Z6K6C_R0_EN.pdf Installation Manual(pdf)]		Documentation: [https://clonwiki.jlab.org/wiki/clondocs/Docs/ASTE-6Z6K6C_R0_EN.pdf Installation Manual (pdf)]

	In case of something wrong with UPSes follow the instruction of [[UPS Troubleshooting]].		In case of something wrong with UPSes follow the instruction of [[UPS Troubleshooting]].

129.57.76.91 at 16:28, 27 November 2012

2012-11-27T16:28:19Z

← Older revision		Revision as of 12:28, 27 November 2012
Line 1:		Line 1:
	CLON cluster equipped with two big SYMMETRA RM 6000 Single-phase UPSes from APC Corporation. These UPSes are multi-battery systems.		CLON cluster equipped with two big SYMMETRA RM 6000 Single-phase UPSes from APC Corporation. These UPSes are multi-battery systems.

	Documentation: [https://clonwiki.jlab.org/wiki/clondocs/Docs/ASTE-6Z6K6C_R0_EN.pdf Installation ~~instruction~~(pdf)]		Documentation: [https://clonwiki.jlab.org/wiki/clondocs/Docs/ASTE-6Z6K6C_R0_EN.pdf Installation Manual(pdf)]

	In case of something wrong with UPSes follow the instruction of [[UPS Troubleshooting]].		In case of something wrong with UPSes follow the instruction of [[UPS Troubleshooting]].

129.57.76.91 at 16:27, 27 November 2012

2012-11-27T16:27:39Z

← Older revision		Revision as of 12:27, 27 November 2012
Line 1:		Line 1:
	CLON cluster equipped with two big SYMMETRA RM 6000 Single-phase UPSes from APC Corporation. These UPSes are multi-battery systems. ~~See~~ Installation ~~instructions.~~		CLON cluster equipped with two big SYMMETRA RM 6000 Single-phase UPSes from APC Corporation. These UPSes are multi-battery systems.

			Documentation: [https://clonwiki.jlab.org/wiki/clondocs/Docs/ASTE-6Z6K6C_R0_EN.pdf Installation instruction(pdf)]

	In case of something wrong with UPSes follow the instruction of [[UPS Troubleshooting]].		In case of something wrong with UPSes follow the instruction of [[UPS Troubleshooting]].

129.57.76.91 at 16:25, 27 November 2012

2012-11-27T16:25:23Z

← Older revision		Revision as of 12:25, 27 November 2012
Line 1:		Line 1:
	CLON cluster equipped with two big SYMMETRA RM 6000 Single-phase UPSes from APC Corporation. These UPSes are multi-battery systems. In case of something wrong with UPSes follow the instruction of [[UPS Troubleshooting]].		CLON cluster equipped with two big SYMMETRA RM 6000 Single-phase UPSes from APC Corporation. These UPSes are multi-battery systems. See Installation instructions.
			In case of something wrong with UPSes follow the instruction of [[UPS Troubleshooting]].

	Smaller UPSes ...		Smaller UPSes ...

Boiarino at 17:57, 29 September 2007

2007-09-29T17:57:03Z

← Older revision		Revision as of 13:57, 29 September 2007
Line 25:		Line 25:
	'''NOTE:''' on some platforms installation procedure requires java1.4, it does not work with java1.5 (at least on clon04 with RHEL4 - Sergey B., 28-sep-2007). If it happens, hide default java1.5 (for example ''mv /usr/bin/java /usr/bin/java.hide'') and run installation procedure again. It will look for java in ''/usr/local/bin/jvm'' directory (I think it will install java there if necessary). After installation is completed, unhide java (''mv /usr/bin/java.hide /usr/bin/java''), procedure will still use java from ''/usr/local/bin/jvm''.		'''NOTE:''' on some platforms installation procedure requires java1.4, it does not work with java1.5 (at least on clon04 with RHEL4 - Sergey B., 28-sep-2007). If it happens, hide default java1.5 (for example ''mv /usr/bin/java /usr/bin/java.hide'') and run installation procedure again. It will look for java in ''/usr/local/bin/jvm'' directory (I think it will install java there if necessary). After installation is completed, unhide java (''mv /usr/bin/java.hide /usr/bin/java''), procedure will still use java from ''/usr/local/bin/jvm''.

	After installation completed for every machine, login to UPS_CHB1, goto ''UPS->PowerChute->clients'' and fix client's IP addresses. For some reasons installation procedure uses not default network interfaces for multi-network sometimes, so it must be changed to 167 subnet manually (it may work but since UPS_CHB1 is on 167 subnet so all ~~machines should be communicating through~~.		After installation completed for every machine, login to UPS_CHB1, goto ''UPS->PowerChute->clients'' and fix client's IP addresses. For some reasons installation procedure uses not default network interfaces for multi-network sometimes, so it must be changed to 167 subnet manually (it may work through other subnets but since UPS_CHB1 is on 167 subnet, lets keep all clients there).

	Now, set ''Low Battary Duration'' in ''UPS->Configuration->Shutdown'' menu to 7 minutes.		Now, set ''Low Battary Duration'' in ''UPS->Configuration->Shutdown'' menu to 7 minutes.

Boiarino at 14:55, 29 September 2007

2007-09-29T14:55:11Z

← Older revision		Revision as of 10:55, 29 September 2007
Line 23:		Line 23:
	Shortly, on every machine where it suppose to be installed, goto ''/usr/local/downloads'' directory; on Solaris(Sparc) run ''./pcns221sol.bin'', on Linux run ''./pcns221lnx.bin''; on Solaris(x86) goto ''/usr/local/downloads/PowerChute'' and run command ''java -cp .:install.jar:util.jar load''. Follow instructions, choose ''/opt/PowerChute'' as installation directory, ''Typical Install'', and UPS_CHB1's IP address as ''Management Card IP'' (we assume that UPS_CHB1 have bigger load then other UPSes). All other settings are default.		Shortly, on every machine where it suppose to be installed, goto ''/usr/local/downloads'' directory; on Solaris(Sparc) run ''./pcns221sol.bin'', on Linux run ''./pcns221lnx.bin''; on Solaris(x86) goto ''/usr/local/downloads/PowerChute'' and run command ''java -cp .:install.jar:util.jar load''. Follow instructions, choose ''/opt/PowerChute'' as installation directory, ''Typical Install'', and UPS_CHB1's IP address as ''Management Card IP'' (we assume that UPS_CHB1 have bigger load then other UPSes). All other settings are default.

	'''NOTE:''' ~~it seems~~ installation procedure requires java1.4, it does not work with java1.5 (at least on clon04 with RHEL4 - Sergey B., 28-sep-2007). If java1.5 ~~is installed, hide it~~ (for example ''mv /usr/bin/java /usr/bin/java.hide'') and run installation procedure again. It will look for java in ''/usr/local/bin/jvm'' directory (I think it will install java there if necessary). After installation is completed, unhide java (''mv /usr/bin/java.hide /usr/bin/java''), procedure will still use java from ''/usr/local/bin/jvm''.		'''NOTE:''' on some platforms installation procedure requires java1.4, it does not work with java1.5 (at least on clon04 with RHEL4 - Sergey B., 28-sep-2007). If it happens, hide default java1.5 (for example ''mv /usr/bin/java /usr/bin/java.hide'') and run installation procedure again. It will look for java in ''/usr/local/bin/jvm'' directory (I think it will install java there if necessary). After installation is completed, unhide java (''mv /usr/bin/java.hide /usr/bin/java''), procedure will still use java from ''/usr/local/bin/jvm''.

	After installation completed for every machine, login to UPS_CHB1, goto ''UPS->PowerChute->clients'' and fix client's IP addresses. For some reasons installation procedure uses not default network interfaces for multi-network sometimes, so it must be changed to 167 subnet manually (it may work but since UPS_CHB1 is on 167 subnet so all machines should be communicating through.		After installation completed for every machine, login to UPS_CHB1, goto ''UPS->PowerChute->clients'' and fix client's IP addresses. For some reasons installation procedure uses not default network interfaces for multi-network sometimes, so it must be changed to 167 subnet manually (it may work but since UPS_CHB1 is on 167 subnet so all machines should be communicating through.

Boiarino at 14:53, 29 September 2007

2007-09-29T14:53:34Z

← Older revision		Revision as of 10:53, 29 September 2007
Line 23:		Line 23:
	Shortly, on every machine where it suppose to be installed, goto ''/usr/local/downloads'' directory; on Solaris(Sparc) run ''./pcns221sol.bin'', on Linux run ''./pcns221lnx.bin''; on Solaris(x86) goto ''/usr/local/downloads/PowerChute'' and run command ''java -cp .:install.jar:util.jar load''. Follow instructions, choose ''/opt/PowerChute'' as installation directory, ''Typical Install'', and UPS_CHB1's IP address as ''Management Card IP'' (we assume that UPS_CHB1 have bigger load then other UPSes). All other settings are default.		Shortly, on every machine where it suppose to be installed, goto ''/usr/local/downloads'' directory; on Solaris(Sparc) run ''./pcns221sol.bin'', on Linux run ''./pcns221lnx.bin''; on Solaris(x86) goto ''/usr/local/downloads/PowerChute'' and run command ''java -cp .:install.jar:util.jar load''. Follow instructions, choose ''/opt/PowerChute'' as installation directory, ''Typical Install'', and UPS_CHB1's IP address as ''Management Card IP'' (we assume that UPS_CHB1 have bigger load then other UPSes). All other settings are default.

	'''NOTE:''' it seems installation procedure requires java1.4, it does not work with java1.5. If java1.5 is installed, hide it (for example ''mv /usr/bin/java /usr/bin/java.hide'') and run installation procedure again. It will look for java in ''/usr/local/bin/jvm'' directory (I think it will install java there if necessary). After installation is completed, unhide java (''mv /usr/bin/java.hide /usr/bin/java''), procedure will still use java from ''/usr/local/bin/jvm''.		'''NOTE:''' it seems installation procedure requires java1.4, it does not work with java1.5 (at least on clon04 with RHEL4 - Sergey B., 28-sep-2007). If java1.5 is installed, hide it (for example ''mv /usr/bin/java /usr/bin/java.hide'') and run installation procedure again. It will look for java in ''/usr/local/bin/jvm'' directory (I think it will install java there if necessary). After installation is completed, unhide java (''mv /usr/bin/java.hide /usr/bin/java''), procedure will still use java from ''/usr/local/bin/jvm''.

	After installation completed for every machine, login to UPS_CHB1, goto ''UPS->PowerChute->clients'' and fix client's IP addresses. For some reasons installation procedure uses not default network interfaces for multi-network sometimes, so it must be changed to 167 subnet manually (it may work but since UPS_CHB1 is on 167 subnet so all machines should be communicating through.		After installation completed for every machine, login to UPS_CHB1, goto ''UPS->PowerChute->clients'' and fix client's IP addresses. For some reasons installation procedure uses not default network interfaces for multi-network sometimes, so it must be changed to 167 subnet manually (it may work but since UPS_CHB1 is on 167 subnet so all machines should be communicating through.

Boiarino at 14:47, 29 September 2007

2007-09-29T14:47:53Z

← Older revision		Revision as of 10:47, 29 September 2007
Line 23:		Line 23:
	Shortly, on every machine where it suppose to be installed, goto ''/usr/local/downloads'' directory; on Solaris(Sparc) run ''./pcns221sol.bin'', on Linux run ''./pcns221lnx.bin''; on Solaris(x86) goto ''/usr/local/downloads/PowerChute'' and run command ''java -cp .:install.jar:util.jar load''. Follow instructions, choose ''/opt/PowerChute'' as installation directory, ''Typical Install'', and UPS_CHB1's IP address as ''Management Card IP'' (we assume that UPS_CHB1 have bigger load then other UPSes). All other settings are default.		Shortly, on every machine where it suppose to be installed, goto ''/usr/local/downloads'' directory; on Solaris(Sparc) run ''./pcns221sol.bin'', on Linux run ''./pcns221lnx.bin''; on Solaris(x86) goto ''/usr/local/downloads/PowerChute'' and run command ''java -cp .:install.jar:util.jar load''. Follow instructions, choose ''/opt/PowerChute'' as installation directory, ''Typical Install'', and UPS_CHB1's IP address as ''Management Card IP'' (we assume that UPS_CHB1 have bigger load then other UPSes). All other settings are default.

	'''NOTE:''' it seems installation procedure requires java1.4, it does not work with java1.5. If java1.5 is installed, hide it (for example ''mv /usr/bin/java /usr/bin/java.hide'') and run installation procedure again. It will look for java in ''/usr/local/bin/jvm'' directory (I think it will install java there if necessary). After ~~all~~ unhide java (''mv /usr/bin/java.hide /usr/bin/java'')~~. Not sure what~~ will ~~happens on reboot - will it pick up java1.5 again ?? Need to check~~.		'''NOTE:''' it seems installation procedure requires java1.4, it does not work with java1.5. If java1.5 is installed, hide it (for example ''mv /usr/bin/java /usr/bin/java.hide'') and run installation procedure again. It will look for java in ''/usr/local/bin/jvm'' directory (I think it will install java there if necessary). After installation is completed, unhide java (''mv /usr/bin/java.hide /usr/bin/java''), procedure will still use java from ''/usr/local/bin/jvm''.

	After installation completed for every machine, login to UPS_CHB1, goto ''UPS->PowerChute->clients'' and fix client's IP addresses. For some reasons installation procedure uses not default network interfaces for multi-network sometimes, so it must be changed to 167 subnet manually (it may work but since UPS_CHB1 is on 167 subnet so all machines should be communicating through.		After installation completed for every machine, login to UPS_CHB1, goto ''UPS->PowerChute->clients'' and fix client's IP addresses. For some reasons installation procedure uses not default network interfaces for multi-network sometimes, so it must be changed to 167 subnet manually (it may work but since UPS_CHB1 is on 167 subnet so all machines should be communicating through.

Boiarino at 14:24, 29 September 2007

2007-09-29T14:24:12Z

← Older revision		Revision as of 10:24, 29 September 2007
Line 22:		Line 22:

	Shortly, on every machine where it suppose to be installed, goto ''/usr/local/downloads'' directory; on Solaris(Sparc) run ''./pcns221sol.bin'', on Linux run ''./pcns221lnx.bin''; on Solaris(x86) goto ''/usr/local/downloads/PowerChute'' and run command ''java -cp .:install.jar:util.jar load''. Follow instructions, choose ''/opt/PowerChute'' as installation directory, ''Typical Install'', and UPS_CHB1's IP address as ''Management Card IP'' (we assume that UPS_CHB1 have bigger load then other UPSes). All other settings are default.		Shortly, on every machine where it suppose to be installed, goto ''/usr/local/downloads'' directory; on Solaris(Sparc) run ''./pcns221sol.bin'', on Linux run ''./pcns221lnx.bin''; on Solaris(x86) goto ''/usr/local/downloads/PowerChute'' and run command ''java -cp .:install.jar:util.jar load''. Follow instructions, choose ''/opt/PowerChute'' as installation directory, ''Typical Install'', and UPS_CHB1's IP address as ''Management Card IP'' (we assume that UPS_CHB1 have bigger load then other UPSes). All other settings are default.

			'''NOTE:''' it seems installation procedure requires java1.4, it does not work with java1.5. If java1.5 is installed, hide it (for example ''mv /usr/bin/java /usr/bin/java.hide'') and run installation procedure again. It will look for java in ''/usr/local/bin/jvm'' directory (I think it will install java there if necessary). After all unhide java (''mv /usr/bin/java.hide /usr/bin/java''). Not sure what will happens on reboot - will it pick up java1.5 again ?? Need to check.

	After installation completed for every machine, login to UPS_CHB1, goto ''UPS->PowerChute->clients'' and fix client's IP addresses. For some reasons installation procedure uses not default network interfaces for multi-network sometimes, so it must be changed to 167 subnet manually (it may work but since UPS_CHB1 is on 167 subnet so all machines should be communicating through.		After installation completed for every machine, login to UPS_CHB1, goto ''UPS->PowerChute->clients'' and fix client's IP addresses. For some reasons installation procedure uses not default network interfaces for multi-network sometimes, so it must be changed to 167 subnet manually (it may work but since UPS_CHB1 is on 167 subnet so all machines should be communicating through.