November 29, 2017 online meeting minutes - Revision history

Boiarino at 15:56, 29 November 2017

2017-11-29T15:56:53Z

← Older revision		Revision as of 11:56, 29 November 2017
Line 14:		Line 14:
	* DAQ: rols info - text, histos; test subset of ROCs separately for performance purposes; check if all data in data stream, EPICS and RCDB; test mode 7 at some point		* DAQ: rols info - text, histos; test subset of ROCs separately for performance purposes; check if all data in data stream, EPICS and RCDB; test mode 7 at some point

	* Trigger: offline reconstruction must be running (all trig banks); <det>mon has pulse histogram, will be running from 1 trigger bit and set timing; delay scan using scalers will be done; cluster energy histogram to control energy threshold, Cole knows scale from cosmic; run with different conditions and record data for offline analysis, will prepare trigger config file for every trigger setting		* Trigger: offline reconstruction must be running (all trig banks); <det>mon has pulse histogram, will be running from 1 trigger bit and set timing; delay scan using scalers will be done; cluster energy histogram to control energy threshold, Cole knows scale from cosmic; run with different conditions and record data for offline analysis, will prepare trigger config file for every trigger setting; trigger pattern is 64bit now, will be described

Boiarino at 15:51, 29 November 2017

2017-11-29T15:51:36Z

← Older revision		Revision as of 11:51, 29 November 2017
Line 1:		Line 1:
	present: Sergey Boyarinov, Valery, Rafo, Cole, Raffaella		present: Sergey Boyarinov, Valery, Rafo, Cole, Raffaella, Ben, Stepan, Nathan, Pasyuk

	1. DAQ/Trigger:		1. DAQ/Trigger:
Line 5:		Line 5:
	* what is ready: PROD config contains 'almost' everything (all VME crates, FC VTP boards), run with 60KHz random pulser and block_level=40, got 16kHz/200MByte/sec		* what is ready: PROD config contains 'almost' everything (all VME crates, FC VTP boards), run with 60KHz random pulser and block_level=40, got 16kHz/200MByte/sec

	* what is missing:		* what is missing: scaler1 crate commissioning, Stepan will help with helicity signals, will do it after meeting;, 1KHz will be connected to TS, readout scaler1 only on corresponding event type; check faraday etc are connected

			* one FTOF VTP is missing, may take one from CND


	2. DAQ and Trigger commissioning plans		2. DAQ and Trigger commissioning plans

	* DAQ		* DAQ: rols info - text, histos; test subset of ROCs separately for performance purposes; check if all data in data stream, EPICS and RCDB; test mode 7 at some point

	* Trigger		* Trigger: offline reconstruction must be running (all trig banks); <det>mon has pulse histogram, will be running from 1 trigger bit and set timing; delay scan using scalers will be done; cluster energy histogram to control energy threshold, Cole knows scale from cosmic; run with different conditions and record data for offline analysis, will prepare trigger config file for every trigger setting

Boiarino at 15:03, 29 November 2017

2017-11-29T15:03:16Z

← Older revision		Revision as of 11:03, 29 November 2017
Line 1:		Line 1:
	present: Sergey Boyarinov		present: Sergey Boyarinov, Valery, Rafo, Cole, Raffaella

	1. DAQ/Trigger:		1. DAQ/Trigger:

	* what is ready:		* what is ready: PROD config contains 'almost' everything (all VME crates, FC VTP boards), run with 60KHz random pulser and block_level=40, got 16kHz/200MByte/sec

	* what is missing:		* what is missing:

Boiarino: Created page with "present: Sergey Boyarinov 1. DAQ/Trigger: * what is ready: * what is missing: 2. DAQ and Trigger commissioning plans * DAQ * Trigger"

2017-11-29T14:35:04Z

Created page with "present: Sergey Boyarinov 1. DAQ/Trigger: * what is ready: * what is missing: 2. DAQ and Trigger commissioning plans * DAQ * Trigger"

New page

present: Sergey Boyarinov

1. DAQ/Trigger:

* what is ready:

* what is missing:

2. DAQ and Trigger commissioning plans

* DAQ

* Trigger