November 1, 2017 online meeting minutes - Revision history

Boiarino at 15:45, 1 November 2017

2017-11-01T15:45:49Z

← Older revision		Revision as of 11:45, 1 November 2017
Line 14:		Line 14:
	contains trigger banks (39 events) and should be used to develop and check trigger banks conversion from evil to hip format, and for monitoring tools check		contains trigger banks (39 events) and should be used to develop and check trigger banks conversion from evil to hip format, and for monitoring tools check

	- PCAL strip threshold will be applied once ~~see [~~[https://clonwiki0.jlab.org/clondocs/Docs/PCALTriggerThreshIssueFromCole.pdf Cole's picture]]; maybe make all strips double ? may have space for mip trigger (up and low threshold for every hit energy, or maybe make ftof send info directly to pcal on stage 1)		- PCAL strip threshold will be applied once during translation, not second time ti splitted strips to avoid effect shown on [https://clonwiki0.jlab.org/wiki/clondocs/Docs/PCALTriggerThreshIssueFromCole.pdf Cole's picture]; maybe make all strips double ? may have space for mip trigger (up and low threshold for every hit energy, or maybe make ftof send info directly to pcal on stage 1)

	- Andrea sent email with lookup tables for stage 2; Ben and Sergey will provide stage2 template for Rafo, he'll start writing simulation		- Andrea sent email with lookup tables for stage 2; Ben and Sergey will provide stage2 template for Rafo, he'll start writing simulation

Boiarino at 15:42, 1 November 2017

2017-11-01T15:42:48Z

← Older revision		Revision as of 11:42, 1 November 2017
Line 14:		Line 14:
	contains trigger banks (39 events) and should be used to develop and check trigger banks conversion from evil to hip format, and for monitoring tools check		contains trigger banks (39 events) and should be used to develop and check trigger banks conversion from evil to hip format, and for monitoring tools check

	- PCAL strip threshold will be applied once ~~- Coles~~ picture; maybe make all strips double ? may have space for mip trigger (up and low threshold for every hit energy, or maybe make ftof send info directly to pcal on stage 1)		- PCAL strip threshold will be applied once see [[https://clonwiki0.jlab.org/clondocs/Docs/PCALTriggerThreshIssueFromCole.pdf Cole's picture]]; maybe make all strips double ? may have space for mip trigger (up and low threshold for every hit energy, or maybe make ftof send info directly to pcal on stage 1)

	- Andrea sent email with lookup tables for stage 2; Ben and Sergey will provide stage2 template for Rafo, he'll start writing simulation		- Andrea sent email with lookup tables for stage 2; Ben and Sergey will provide stage2 template for Rafo, he'll start writing simulation

Boiarino at 15:21, 1 November 2017

2017-11-01T15:21:20Z

← Older revision		Revision as of 11:21, 1 November 2017
Line 19:		Line 19:

	- commissioning plan from Dan Carman: trigger (Valery) and DAQ (Sergey); Valery will collect info and make a plan, and we'll see missing tools; Valery will ask detector groups, what kind of triggers they want first few days of detectors commissioning; after that need trigger for beam intensity studies; after that trigger system commissioning plan will be used		- commissioning plan from Dan Carman: trigger (Valery) and DAQ (Sergey); Valery will collect info and make a plan, and we'll see missing tools; Valery will ask detector groups, what kind of triggers they want first few days of detectors commissioning; after that need trigger for beam intensity studies; after that trigger system commissioning plan will be used

			- monitoring tools: we provide info for it (data banks, messages, hosts), somebody else do histograms drawing


Line 28:		Line 30:

	* RF on FC: 2 crates, 2 v1290 and 2 FADCs		* RF on FC: 2 crates, 2 v1290 and 2 FADCs

			* epics server from Ken to be tested - about next week (Sergey and Nathan)

			* nim-ecl converter to TS for external triggers (like faraday cap)

Boiarino at 15:02, 1 November 2017

2017-11-01T15:02:11Z

← Older revision		Revision as of 11:02, 1 November 2017
Line 16:		Line 16:
	- PCAL strip threshold will be applied once - Coles picture; maybe make all strips double ? may have space for mip trigger (up and low threshold for every hit energy, or maybe make ftof send info directly to pcal on stage 1)		- PCAL strip threshold will be applied once - Coles picture; maybe make all strips double ? may have space for mip trigger (up and low threshold for every hit energy, or maybe make ftof send info directly to pcal on stage 1)

	- Andrea sent email with lookup tables for stage 2;		- Andrea sent email with lookup tables for stage 2; Ben and Sergey will provide stage2 template for Rafo, he'll start writing simulation

			- commissioning plan from Dan Carman: trigger (Valery) and DAQ (Sergey); Valery will collect info and make a plan, and we'll see missing tools; Valery will ask detector groups, what kind of triggers they want first few days of detectors commissioning; after that need trigger for beam intensity studies; after that trigger system commissioning plan will be used


Line 25:		Line 26:

	* scalers: 2 struck scalers installed in trig2 crate along with optic-nom converter; helicity optical signals from MCC were fined-out in counting room and sent to two locations in the hall: SF level1 north and pie tower; all electronics will be checked, and scalers readout will be added to day		* scalers: 2 struck scalers installed in trig2 crate along with optic-nom converter; helicity optical signals from MCC were fined-out in counting room and sent to two locations in the hall: SF level1 north and pie tower; all electronics will be checked, and scalers readout will be added to day

			* RF on FC: 2 crates, 2 v1290 and 2 FADCs

Boiarino at 14:32, 1 November 2017

2017-11-01T14:32:17Z

← Older revision		Revision as of 10:32, 1 November 2017
Line 1:		Line 1:
	present: Sergey Boyarinov		present: Sergey Boyarinov, Chris, Ben, Valery, Cole, Rafo, Stepan, Nathan

	1. CLAS12 trigger		1. CLAS12 trigger

	* hardware		* hardware: fiber transceivers installed 'almost' everywhere; fibers installation in process, last order to be arrived this week; equal sec4 tdc cable missing; FTOF VTPs still in repair, will goto FTOF, others can be installed right now

	* cabling		* cabling - see above

	* software: FTOF trigger C++ and firmware just finished, will be tested; CTOF and CND cosmic trigger will be added to FTOF project; two GEMC files were preliminary processed through trigger C++ implementation with ECAL, PCAL, HTCC and FTOF turned on, file		* software: FTOF trigger C++ and firmware just finished, will be tested; CTOF and CND cosmic trigger will be added to FTOF project; two GEMC files were preliminary processed through trigger C++ implementation with ECAL, PCAL, HTCC and FTOF turned on, file
Line 13:		Line 13:

	contains trigger banks (39 events) and should be used to develop and check trigger banks conversion from evil to hip format, and for monitoring tools check		contains trigger banks (39 events) and should be used to develop and check trigger banks conversion from evil to hip format, and for monitoring tools check

			- PCAL strip threshold will be applied once - Coles picture; maybe make all strips double ? may have space for mip trigger (up and low threshold for every hit energy, or maybe make ftof send info directly to pcal on stage 1)

			- Andrea sent email with lookup tables for stage 2;



	2. DAQ preparations		2. DAQ preparations

Boiarino at 13:33, 1 November 2017

2017-11-01T13:33:31Z

← Older revision		Revision as of 09:33, 1 November 2017
Line 10:		Line 10:

	/work/boiarino/data/TCS_1_AllTrig_Detectors.evio_out.0		/work/boiarino/data/TCS_1_AllTrig_Detectors.evio_out.0
			/work/boiarino/data/TCS_2_AllTrig_Detectors.evio_out.0

	contains trigger banks (39 events) and should be used to develop and check trigger banks conversion from evil to hip format, and for monitoring tools check		contains trigger banks (39 events) and should be used to develop and check trigger banks conversion from evil to hip format, and for monitoring tools check

Boiarino at 13:33, 1 November 2017

2017-11-01T13:33:08Z

← Older revision		Revision as of 09:33, 1 November 2017
Line 7:		Line 7:
	* cabling		* cabling

	* software: FTOF trigger C++ and firmware just finished, will be tested; CTOF and CND cosmic trigger will be added to FTOF project		* software: FTOF trigger C++ and firmware just finished, will be tested; CTOF and CND cosmic trigger will be added to FTOF project; two GEMC files were preliminary processed through trigger C++ implementation with ECAL, PCAL, HTCC and FTOF turned on, file

			/work/boiarino/data/TCS_1_AllTrig_Detectors.evio_out.0

			contains trigger banks (39 events) and should be used to develop and check trigger banks conversion from evil to hip format, and for monitoring tools check

	2. DAQ preparations		2. DAQ preparations

Boiarino: Created page with "present: Sergey Boyarinov 1. CLAS12 trigger * hardware * cabling * software: FTOF trigger C++ and firmware just finished, will be tested; CTOF and CND cosmic trigger will..."

2017-11-01T13:25:19Z

Created page with "present: Sergey Boyarinov 1. CLAS12 trigger * hardware * cabling * software: FTOF trigger C++ and firmware just finished, will be tested; CTOF and CND cosmic trigger will..."

New page

present: Sergey Boyarinov

1. CLAS12 trigger

* hardware

* cabling

* software: FTOF trigger C++ and firmware just finished, will be tested; CTOF and CND cosmic trigger will be added to FTOF project

2. DAQ preparations

* TDC calibration: "noise" generator installed and connected to discriminators's test inputs in tdcftof2 crate, first run data taken, will be analyzed (andrey Kim); tdc1290 library was updated, it has all necessary functions to upload/download/control compensation table and tic chip internal delay adjustments

* scalers: 2 struck scalers installed in trig2 crate along with optic-nom converter; helicity optical signals from MCC were fined-out in counting room and sent to two locations in the hall: SF level1 north and pie tower; all electronics will be checked, and scalers readout will be added to day