May 12, 2010 online meeting minutes - Revision history

98.166.92.51 at 19:55, 12 May 2010

2010-05-12T19:55:53Z

← Older revision		Revision as of 15:55, 12 May 2010
Line 2:		Line 2:

	dc10 trouble:		dc10 trouble:
	* trouble reading TDCs, replace SFI, CPU, termination cards, works now; one TDC		* trouble reading TDCs, replace SFI, CPU, termination cards, works now; one TDC was replaced; probably it was termination card, will test that card to confirm
	was replaced; probably it was termination card, will test that card to confirm

	l2reset first test results:		l2reset first test results:
	* 6 adb crates connected (SF level1 south)		* 6 adb crates connected (SF level1 south)
	* works, log file updated		* works, log file updated
	* need to set a limit on the number of reset attempts, if unsuccessful send		* need to set a limit on the number of reset attempts, if unsuccessful send error to alarm browser and continue monitoring until fixed, then remove error from alarm browser
	error to alarm browser and continue monitoring until fixed, then remove error		* need epics gui to reset manualy, crate by crate (30 buttons) plus one common button - will ask Hovanes
	from alarm browser		* to finish project, need to run cables - in progress, also BNC cable connectors, T-s and BNC-lemo adapters; cables must be labels
	* need epics gui to reset manualy, crate by crate (30 buttons) plus one common
	button - will ask Hovanes
	* to finish project, need to run cables - in progress, also BNC cable
	connectors, T-s and BNC-lemo adapters; cables must be labels

	DAQ: seems sometimes cannot end run properly if front end busy issued; probably		DAQ: seems sometimes cannot end run properly if front end busy issued; probably clastrig2 problem, will investigate
	clastrig2 problem, will investigate

	terminal server etherlite2 failed twice, will replace and investigate		terminal server etherlite2 failed twice, will replace and investigate

	test setup (especially fastbus) in counting room must be restored promptly		test setup (especially fastbus) in counting room must be restored promptly to test boards
	to test boards

98.166.92.51 at 19:55, 12 May 2010

2010-05-12T19:55:03Z

← Older revision		Revision as of 15:55, 12 May 2010
Line 2:		Line 2:

	dc10 trouble:		dc10 trouble:
	- trouble reading TDCs, replace SFI, CPU, termination cards, works now; one TDC		* trouble reading TDCs, replace SFI, CPU, termination cards, works now; one TDC
	was replaced; probably it was termination card, will test that card to confirm		was replaced; probably it was termination card, will test that card to confirm

	l2reset first test results:		l2reset first test results:
	- 6 adb crates connected (SF level1 south)		* 6 adb crates connected (SF level1 south)
	- works, log file updated		* works, log file updated
	- need to set a limit on the number of reset attempts, if unsuccessful send		* need to set a limit on the number of reset attempts, if unsuccessful send
	error to alarm browser and continue monitoring until fixed, then remove error		error to alarm browser and continue monitoring until fixed, then remove error
	from alarm browser		from alarm browser
	- need epics gui to reset manualy, crate by crate (30 buttons) plus one common		* need epics gui to reset manualy, crate by crate (30 buttons) plus one common
	button - will ask Hovanes		button - will ask Hovanes
	- to finish project, need to run cables - in progress, also BNC cable		* to finish project, need to run cables - in progress, also BNC cable
	connectors, T-s and BNC-lemo adapters; cables must be labels		connectors, T-s and BNC-lemo adapters; cables must be labels

98.166.92.51 at 19:54, 12 May 2010

2010-05-12T19:54:35Z

New page

present: Sergey Boyarinov, Sergey Pozdnyakov

dc10 trouble:
- trouble reading TDCs, replace SFI, CPU, termination cards, works now; one TDC
was replaced; probably it was termination card, will test that card to confirm

l2reset first test results:
- 6 adb crates connected (SF level1 south)
- works, log file updated
- need to set a limit on the number of reset attempts, if unsuccessful send
error to alarm browser and continue monitoring until fixed, then remove error
from alarm browser
- need epics gui to reset manualy, crate by crate (30 buttons) plus one common
button - will ask Hovanes
- to finish project, need to run cables - in progress, also BNC cable
connectors, T-s and BNC-lemo adapters; cables must be labels

DAQ: seems sometimes cannot end run properly if front end busy issued; probably
clastrig2 problem, will investigate

terminal server etherlite2 failed twice, will replace and investigate

test setup (especially fastbus) in counting room must be restored promptly
to test boards