| CAEN V560 |
| 16 Channel Scaler |
|
|
| Family: VME |
| - 16 channels |
| - ECL, NIM or TTL inputs |
| - 32 bit counting depth |
| - 100 MHz counting frequency |
| - Cascadable channels |
| - Clear, Veto and Test NIM inputs |
|
|
Overview |
|
|
The Mod. V560 is a single width VME module which houses 16 independent 32 bit counting channels at the maximum input frequency of 100 MHz. Each channel can be software enabled to generate an interrupt signal when the counter is full. The interrupt level and the correlated vector can be set and read via std. VME write and read cycles. Each channel can be cascaded with the following one through internal jumpers to produce a 64 bit counting depth. The status of the internal jumpers can be read via std. VME read cycles. All the channels can be cleared via the relevant VME command and via the front panel pushbutton. The unit has a standard A24/A32, D32 VME interface. |
|
|
Technical Specification Table |
|
|
Packaging | 1-unit wide 6U VME module | |||
| Counting depth | 32 bit | ||||
| Counting rate | 100 MHz | ||||
| Double pulse resolution |
5 ns | ||||
| Input channels | Std. differential ECL level, 110 Ohm impedance Min. FWHM 5 ns |
||||
| Veto | Std. NIM level, high impedance Min. FWHM 50 ns |
||||
| Clear | Std. NIM level, high impedance Min. FWHM: 60 ns |
||||
| Test | Std. NIM level, high impedance Max. frequency: 50 MHz Min. FWHM: 10 ns. |