BiRa Systems

FastBus Products

MODEL FB8189

FB8189 FASTBUS POWER SUPPLY

FEATURES

GENERAL DESCRIPTION

This unit is a rack mounted Power Supply Assembly intended for use with a FASTBUS crate. The FB8189 provides the +/- 15VDC, mains switches and metering, and the wired frame for mounting the switching regulators which supply the +5V, - 5.2V, and -2V DC digital power to the crate. All outputs are monitored by dual (voltage & current) LCD digital voltmeters switch selected from the front panel. Input voltage and current are also metered at the front panel. The FB8189 also provides the switched mains voltage for a blower and external switching regulator power supplies. Any combination of three standard 5"x 8"x11-14" packages can be added by inserting them into the slots provided at the rear of the unit. Current options available are 120 or 200A for -2V and 200 or 300A for the -5.2 and +5. For units with switching regulators providing 200A or less each, inputs of 100-130 or 200-260V AC 47-63Hz are available. For crates requiring any switching regulator with an output above 200A units are available only with 200-260VAC 47-63Hz input. All switching regulators have self-contained fans which circulate air inside the chassis. All units have an ambient air temperature operating range of 0-50 degrees C. Switching Regulator Power Supplies plug into pre-wired slots at rear of Power Supply Chassis. The -5.2 and +5V regulators are interchangeable. The +15V DC regulators, mains switching, and metering circuitry are pre-wired with plugs, switching current shunts, and all wiring including power leads to the crate.

ORDERING INFORMATION:

Model FB8189-0 Power supply ± 15V, No switching Regulators
Model FB8189-1 Power supply ± 15V, -2V@120A, -5V@200A, +5V@200A
Model FB8189-2 Power supply ± 15V, -2V@120A, -5V@200A, +5V@300A
Model FB8189-3 Power supply ± 15V, -2V@200A, -5V@300A, +5V@200A
Model FB8189-4 Power supply ± 15V, -2V@200A, -5V@300A, +5V@300A
NOTE 1: +/- 15V Outputs Current Shared to 120% of output shown.
SPECIFICATIONS Model 8189 300 AMP SW. REG. 100-200 AMP SW. REG.
Input 208-240VAC 47-63 Hz 182-262VAC 47-63 Hz 182-240VAC 47-63 Hz
Output (see note 1) ± 15VDC @ 24A +5VDC or -5VDC +5VDC, -5.2VDC or -2VDC
Regulation (line and load) ± 0.2% TOTAL ERROR BAND: +/- 2% or +100mV (whichever is greater) including the following:
  • Input Power variation over the specified range
  • Static Load variation 0-100% of full
  • Dynamic Load stop (10 µsec rise) of 20% or 50A
  • Ripple and Noise
  • Temperature Stability over 0-50° C
  • Drift for an 8-hour period
Noise and Ripple Less than 10 mV p.p.
Ambient Temperature 0-50° C
Temperature Coefficient 0.02%/° C
Transient Recovery 50 µsec typical
Fusing Mains and all Reg. Input
Remote Sensing All Outputs
Overload Protection Foldback Current Limiting All Circuits
Overvoltage Protection 125% max - All Outputs
Overtemperature Protection Automatic Shutdown
Metering Dual Liquid Crystal DVM: All outputs by Switch Select
Options   Status Bit  
Power Loss Holdup 16 msec 20 msec 30 msec
Efficiency 40% 72% 72%
Voltage Adj. ± 2.0% min ± 10% min ± 10% min
Shipping Weights 49 lbs. 24 lbs. 26 lbs.
Size 8.75" x 26" x 19" Rack 5" x 8" x 11" 5" x 8" x 11"

Place a Request For Quotation or Purchase Order with Bi Ra Systems


| Feedback | info@bira.com | Home Page |

Bi Ra Systems, Incorporated
2404 Comanche Road NE
Albuquerque, New Mexico 87107

Ph : 505-881-8887
Fax:505-888-0651