CAEN C469 16-ch Gate And Delay Generator
 ========================================


 CAMAC Commands
 ~~~~~~~~~~~~~~

 F(16) N A(n)   Writes the delay time (W1..W8) of the output selected by subaddress. n=0..15.
                The same output is associated with the two multiplexed outputs ("MUX").
 F(17) N A(n)   Writes the gate width (W1..W8) of the output selected by subaddress. n=0..15.
                The same output is associated with the two multplexed outputs ("MUX").
 F(18) N A(n)   Selects the output to be associated with the two multiplexed outputs ("MUX")
                of the module connectors. n=0..15.
 F(19) N A(0)   Assigns the set gate and delay values to the corresponding outputs.
 F(25) N A(0)   Generates a TEST signal.
 F(9)  N        Resets the module at S1 time.


 C, Z      Resets the module at S2 time.
 X and Q   response for each valid function

-----------------------------------------------------

Note:
 All settings are battery backed-up, so the module does
 not have to be reprogrammed after a power failure:
 in this case, only an F(19) N A(0) CAMAC function has
 to be performed to reassign each stored value to the
 relevant channel.